About WrenchInTheWorks

WrenchInTheWorks · 2025-02-14

Hello awsome peaple of the ST fourms,I've been writing a program on the MB1551-U585AI1-D01 STM32U5 dev board, after getting DMA working and writing some AzureRTOS aware platform functions for the MEMS sensors on the board I have been very successful ...

WrenchInTheWorks · 2025-02-02

Hello,I've been playing with the U585 IOT dev board and really enjoying it, I've got I2C communicating with the sensors without DMA and now I would like to test out the GPDMA. However, there is a little more too this DAM controller then the DMA on th...

WrenchInTheWorks · 2024-10-20

Hi All,I've been using my ST-LinkV3mini for a few weeks now quite happily, until two days ago when it just stopped talking to my M3 MacBook Air (MacOS 15.0.1). I'm fairly sure I know what's happening, when I try to communicate between the laptop and ...

WrenchInTheWorks · 2024-06-20

Hello,First forum post so I apologise if I miss any key information. I'm trying to use NUCLEO-G474RE to test out the functionality of MotionAC using CubeMX to generate the program structure and Clion to edit it. All I am doing right now is trying to ...

WrenchInTheWorks · 2025-02-14

So... it just started working. I'm not sure what I did but I have a feeling that I might have put a bad value or somthing into a reserved reg. It might have had somthing todo with a bad value being put into bit 7. From what I can tell instead of read...

WrenchInTheWorks · 2025-02-14

Good day @Karl Yamashita,HAL is fine, as far as I can tell it transmits fine since I can write to other regs. Not sure if the bellow image will be readable. I'm thinking the same thing about it reseting before acking but I would be surprised since th...

WrenchInTheWorks · 2025-02-14

Ok, so this is a bit embarssing but I'm going to leave it here for anyone who might have simlier issuses. I changed two things that got it working. I made sure all of the interrupts were enabled, particully the I2C and UART event ones. The embarssing...

WrenchInTheWorks · 2025-02-08

Hello @Saket_Om,Unfortunately no success. I'm testing with a very simple program now, works without DMA but the DMA functions don't work. I will include ther ZIP of the project bellow and a screenshot of my output. I'm unsure why the termnal is displ...

WrenchInTheWorks · 2025-02-03

Hello @Saket_Om,Thanks for your help, I appreciate you taking the time. I have had a look through the U575 example, good thinking, I had not considerd having a look at example from a different U5. The first thing I notice is the use of linked-lists, ...

User statistics

User Activity

ism330dhcx ctrl3_c sw_reset I2C callback behavour

Working with I2C and GPDMA on STM32U585 (B-U585I-IOT02A)

ST-LinkV3mini unable to connect, likely freezing when connected to MacOS 15.0.1.

Unable to get MotionAC and MotionFX to link to my .elf for NUCLEO-G474RE

Re: ism330dhcx ctrl3_c sw_reset I2C callback behavour

Re: ism330dhcx ctrl3_c sw_reset I2C callback behavour

Re: Working with I2C and GPDMA on STM32U585 (B-U585I-IOT02A)

Re: Working with I2C and GPDMA on STM32U585 (B-U585I-IOT02A)

Re: Working with I2C and GPDMA on STM32U585 (B-U585I-IOT02A)