About anupam1511

anupam1511 · 2025-01-13

Hi everyone,I am using the LoRaWAN_AT_Slave example code on an STM32WL-based device, and I am operating in OTAA mode with the ChirpStack server to monitor the data. I am successfully sending sensor data to the server at the specified intervals.I have...

anupam1511 · 2024-06-10

after starting a debug its directly going to hardfault handleractually here there 2 boards1)stm32l476vgt6 (using jtag to load code in stm32h74zit6)2)stm32h74zit6facing this warninglibusb: warning [libusb_exit] device 2.1 still referencedlibusb: warni...

anupam1511 · 2024-05-24

i am working on board stm32f103c8t6 and when i am going for debugging in stm32cubeide its shows errorFor bug reports, readhttp://openocd.org/doc/doxygen/bugs.htmlInfo : Listening on port 6666 for tcl connectionsInfo : Listening on port 4444 for telne...

anupam1511 · 2024-12-19

i used this configuration setup in ioc file and call the cdc transmit function in main.c but not working out , is this happening because of VBUS missing as mentioned above by rahu2710 , he is from hardware team , and i am from software team .please h...

anupam1511 · 2024-09-04

You can find a working environment at https://github.com/lamik/VL53L0X_API_STM32_HAL/blob/master/Drivers/VL53L0X/platform/src/while (1){VL53L0X_PerformSingleRangingMeasurement(Dev, &RangingData);if(RangingData.RangeStatus == 0){MessageLen = sprintf((...

anupam1511 · 2024-05-23

Info : STLINK V2J44M29 (API v2) VID:PID 0483:374BInfo : Target voltage: 3.189084Info : clock speed 4000 kHzInfo : stlink_dap_op_connect(connect)Info : SWD DPIDR 0x2ba01477Info : [STM32F103C8Tx.cpu] Cortex-M3 r2p0 processor detectedInfo : [STM32F103C8...

User statistics

User Activity

JSON Payload Not Received in Downlink in LoRaWAN

warning [libusb_exit] device 2.1 still referenced

could not verify st device

Re: STM32H7 USB CDC - without VBUS pin?

Re: VL53L0X API usage guidelines

Re: How to deal wirh : Could not verify ST device! ?