About gshet1

gshet1 · 2024-02-23

Hi folks,I hooked up the B-G474E-DPOW1 board using the micro USB cable to the USB port on my laptop. I confirmed that all the three LEDS (LED6, LED7 and LED9) turn on as expected. But when I open up a PuTTY serial console window by connecting to the ...

gshet1 · 2024-01-04

Hi folks,I would like to use the I2C serial communication protocol to write/read from the Flash Memory using the STM32G474 microcontroller. I am using the B-G474E-DPOW1 board which does not have an EEPROM. Is it possible to achieve this goal or do I ...

gshet1 · 2024-02-26

Hi Kaouthar,Thanks for your feedback on this matter. Please find the settings for the PuTTY serial console window in the attached PuTTY_settings.jpg file. I have also attached a snapshot of the B-G474E-DPOW1 board. I came across the below information...

gshet1 · 2024-01-04

I appreciate your valuable pointers on this matter. The goal is to have the DART-6UL board (NXP i.MX6ULL processor) to behave as the I2C Master and the B-G474E-DPOW1 board having the STM32G474 microcontroller as the I2C Slave EEPROM. I guess I have t...

gshet1 · 2024-01-04

Thanks for your feedback on this matter. My plan is to be able to write/read some data to the EEPROM using the STM32G474 microcontroller via the I2C protocol. But since the B-G474E-DPOW1 board has no EEPROM on it and I have no access to an external E...

User statistics

User Activity

Do not see any boot-up messages for the B-G474E-DPOW1 board having the STM32G474 microcontroller

STM32G474 I2C Write/Read to the Flash Memory

Re: Do not see any boot-up messages for the B-G474E-DPOW1 board having the STM32G474 microcontroller

Re: STM32G474 I2C Write/Read to the Flash Memory

Re: STM32G474 I2C Write/Read to the Flash Memory