About Hito

Hito · 2023-11-22

STM32 DevloperBord : STM32F030C6T6TRCubeMX : version 6.7.0keil : version 5i2c config at standard mode I2C_Speed_Frequancy-100KHZ/*************************************************************************************/static void MX_I2C1_Init(void){/* ...

Hito · 2023-11-24

I change the i2c config pins and i2c module was working as I expected and i also try with i2c bit-banging also workmy i2c module problem solved thanks you for replaying

Hito · 2023-11-23

STM32 DevloperBord : STM32F030C6T6TRCubeMX : version 6.7.0keil : version 5i2c config at standard mode I2C_Speed_Frequancy-100KHZstatic void MX_I2C1_Init(void) { /* USER CODE BEGIN I2C1_Init 0 */ /* USER CODE END I2C1_Init 0 */ /* USER CODE B...

Hito · 2023-11-22

i'm using RTC(MCP79410) as peripheral and communicate with i2cyou suggested three solution i cheked all this threee solutions1) - Verify hardware connections2) - Check pull-up resistors3) - Try to use the latest version of CubeMX 6.9.2void HAL_I2C_Ms...

Hito · 2023-11-21

static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,uint32_t Timeout, uint32_t Tickstart){while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status){/* Check for the Timeout */if (Timeout != HAL_MAX_DEL...

Hito · 2023-11-21

yes both SDA and SCL pin high 3.3v

User statistics

User Activity

I2C MASTER TRANSMIT IS NOT WORKING

Re: I2C_WaitOnFlagUntilTimeout return HAL_ERROR

Re: I2C_WaitOnFlagUntilTimeout return HAL_ERROR

Re: I2C MASTER TRANSMIT IS NOT WORKING

Re: I2C_WaitOnFlagUntilTimeout return HAL_ERROR

Re: I2C_WaitOnFlagUntilTimeout return HAL_ERROR