About WeiJia

WeiJia · 2024-02-20

Hi everyone, I am currently using the VL53L8CX for people counting. However, I have encountered an issue where occasionally, changing the data acquisition rate during the data collection process causes a disruption and prevents further data acquisiti...

WeiJia · 2023-10-18

I am using the latest ULD driver of vl53l8cx. The sensor can work now. But when I use the function vl53l8cx_set_sharpener_percent to change the sharpener param, it does not work. There is no effection on the distance. I also used the vl53l5cx_set_sha...

WeiJia · 2024-03-21

Hi Zhiyuan1 Yeah, there is a real project. And now we have a product based on the L8CX for people counting indoor.2. The sensor can run normally, But sometimes some Hw will corrupt like this. 3. And now we change the sensor ranging frequency just aft...

WeiJia · 2024-02-22

Now, i do not change the data rate , the data colletion will be disruped too. When an error occurs, the status value internally read by the function vl53l8cx_check_data_ready is as follows:[10:23:28.878] check rdy stat0 i2c sta = 0, regs[4] = 0 0 0 ...

WeiJia · 2023-12-22

HI AnneThanks for your reply.Now we use vl53l8x to detect the number of people passing by. The sensor hangs on top.We need to identify the characteristics of the head and shoulder.When people just walk into the FOV of the vl53l8x, we get the data and...

User statistics

User Activity

VL53L8CX changing the data rate

Vl53l8cx sharpener can not be set!

Re: VL53L8CX changing the data rate

Re: VL53L8CX changing the data rate

Re: Vl53l8cx sharpener can not be set!