About Nicolas P.

Nicolas P. · 2016-03-24

Posted on March 24, 2016 at 16:18Hello,I'm unable to unzip the file STM32CubeL4.zip which I found from the link (http://www.st.com/web/catalog/tools/FM147/CL1794/SC961/SS1743/LN1897/PF261908♯) at the bottom of the page : http://www.st.com/web/catal...

Nicolas P. · 2024-12-17

Hello, I'm not sure to understand your problem. Your G4 with TCPP03 is a source. Within the source capability, it exposes 5V@1500mA. For me, 1500mA is the max current you offer. The sink can use whatever it needs within the 1500mA max. So 200mA is OK...

Nicolas P. · 2024-11-11

@ABasi.2 Are you able to see the tick counter increase ? Where do you stand when you break ? Are you able to see some trace when you follow this wiki, just by selecting COM port? Regards, Nicolas

Nicolas P. · 2024-11-06

@ABasi.2 Can you tell us where you land when you break ? Regards, Nicolas

Nicolas P. · 2024-11-06

Hello @ABasi.2 Can you check quickly how much you have for TX_TIMER_TICKS_PER_SECOND in your tx_user.h ? You should have : #define TX_TIMER_TICKS_PER_SECOND 1000 (Similar example on H5 here) Do you see the systick counter updates ? C...

Nicolas P. · 2024-11-06

Hello @ABasi.2 You are right, link was wrong. I corrected: Wiki. Direct link to sink application with Threadx here. Regards, Nicolas

User statistics

User Activity

File STM32CubeL4.zip is currupted

Re: Issue with Low Current Consumption on STM32G474RE with X-NUCLEO-DRP1M1

Re: SNK1M1 board project with azure threadX not working

Re: SNK1M1 board project with azure threadX not working

Re: SNK1M1 board project with azure threadX not working

Re: SNK1M1 board project with azure threadX not working