About JPabl.1

JPabl.1 · 2024-11-19

I created a custom linux image for this target using the distribution package + x-linux-qt and the image "st-image-qt". This image is working correctly on my target. Now, I want to add UART5 and UART4 to receive data over those 2 serial ports. As fa...

JPabl.1 · 2024-11-15

I'm using a textarea widget with a wildcard, but as you can see in the image, the text appears invertedAny way to solve this?

JPabl.1 · 2024-11-13

I created a st-image-qt image using the STM32MP Distribution package and X-LINUX-QT add-on for the STM32MP157F-DK2 board.I could flash this image using the dd command in Linux and my target board is running correctly.On the other side, I created a qt...

JPabl.1 · 2024-11-10

I'm following the starter and distribution package for the stm32mp157f-dk2.A few weeks ago I was able to flash my target board with the starter package and can confirm it initialized the st gui and so on.I also added the usb gadget in my vm as stated...

JPabl.1 · 2024-11-09

I created a qt quick app onqt version 6.7.3 for the stm32mp157f-disco. I was able to test using qt creator and boot 2 qt on the target board and it worked just fine. Now, I'm in process of building the linux image for the target. Since I don't fully...

JPabl.1 · 2024-11-16

The problem was in the syntax. Space at the beginning, and no space at the end works correctly IMAGE_INSTALL:append = " mygui"

JPabl.1 · 2024-11-16

I added IMAGE_INSTALL_APPEND += " gui" and compiled the image. When flashing the board I look for /usr/bin/gui but can't find anything. The closes thing I could find is usr/share/examples/gui but it has a "rasterwindow" file, so I think it didn't wor...

JPabl.1 · 2024-11-12

I was able to build the st-image-qt for the stm32mp157f-dk2 using the distribution package and x-linux-qt. I wasn't able to flash the board using stcubeprogrammer but the dd command for the microsd card on linux worked. I'm having problems finding m...

JPabl.1 · 2024-11-12

I tried building the image with the st way and I was able to add the x-linux-qt package to the stm32mp157d-fk2 board and flash the board using the dd command from linux for the microsd card. I'm having problems finding my custom recipe in the full i...

JPabl.1 · 2024-11-12

I decided to flash the microsd directly using the dd command from linux and that worked.

User statistics

User Activity

How to add UART support for DTS and compile it for STM32MP157F-DK2

Textarea appears inverted

How to find the custom recipe created in yocto inside st-image-qt

cubeprogrammer doesn't reconnect after flashing for stm32mp157f-dk2

yocto image fails for stm32mp15-disco

Re: How to find the custom recipe created in yocto inside st-image-qt

Re: How to find the custom recipe created in yocto inside st-image-qt

Re: how to start GUI for STM32MP135F-DK using QT

Re: yocto image fails for stm32mp15-disco

Re: cubeprogrammer doesn't reconnect after flashing for stm32mp157f-dk2