About LSpad.1

LSpad.1 · 2021-01-27

Hi,i have an STM32WB used as client. Compiling the project with libraries 1.8.0 i can connect 5 BLE servers without any problem, compiling the project with libraries 1.10.0 i can't connect more than 2 BLE Servers, from the third aci_gap_create_connec...

LSpad.1 · 2020-12-30

Hi,I am running a system with some STM32WB, one client and some server.Right now i am connecting, pairing and bonding the devices. If i start from a condition where i have all the server not bonded (aci_gap_get_bonded_devices return nothing) and I st...

LSpad.1 · 2020-11-18

Hi,i have 2 boards (client and server) with STM32WB that communicates through BLE messages. Right now, at every reboot/disconnection i am redoing the pairing, but it is really slow.In order to reduce the whole connection time, i am trying to use the ...

LSpad.1 · 2020-11-18

Hi,for my application i need to connect from 8 to 16 BLE devices (STM32WB sensor boards) to a LTE gateway (always a STM32WB board). Since actually the maximum connectable devices in master mode are 5, I found not ideal the solution to switch device t...

LSpad.1 · 2020-10-26

Hi,i would like to execute command after i click the debug icon, but before the debug starts.In particular:I have an app with a bootloader. The bootloader check the CRC of the firmware before start it.Right now i generate, thanks to post build operat...

LSpad.1 · 2022-06-13

The opposite. The server is the advertiser and the one that starts pairing/rebond process. The client finds the advertiser (or not if the server uses directed advertising) and starts the connection.

LSpad.1 · 2022-06-10

I solve starting pairing and rebond from the server and not from the client. Apparently it is the correct way to use BLE, the pairing and bonding are not started from the one that start the connection but from the one that advertise.

LSpad.1 · 2021-06-14

You will need also to redefine CFG_BLE_LSE_SOURCE=1L

LSpad.1 · 2021-02-04

The new libraries modify the max link number to 2, so you have to manually change it back to 8.

LSpad.1 · 2020-12-07

With the function aci_gap_get_security_level() the security levels of the connection can be discovered

User statistics

User Activity

STM32WB BLE Connection examples v1.10.0

STM32WB pairing error with mixed bonded/nonbonded devices

BLE: detect security level

BLE: master up to 16 links

CubeIDE Execute command before debug

Re: STM32WB pairing error with mixed bonded/nonbonded devices

Re: STM32WB pairing error with mixed bonded/nonbonded devices

Re: STM32WB LSE vs LSI2

Re: STM32WB BLE Connection examples v1.10.0

Re: BLE: detect security level