About Rahul1

Rahul1 · 2019-11-20

System Clock is PLL_HSEHSE connected is 12MHzHSE_VALUE is set 12000000 & SystemCoreClock = 180000000 in system_stm32f4xx.cHCLK = 180MHzPCLK1 = 45MHzPLLM = 12;PLLN = 360;PLLP = RCC_PLLP_DIV2;PLLQ = 4;Clocks are configured as expected, cross checked RC...

Rahul1 · 2019-11-22

:thumbs_up:

Rahul1 · 2019-11-21

You are right USB to RS232 converter was the issue.Changed it with FTDI FT232RL.Now issue is little different as you can see belowand also like below:Please check

Rahul1 · 2019-11-21

Here's my code:int main(void) { float tmp_flt = 1.543; uint32_t apb1Clk; char tmp_ch = 'A'; char tmp_ch1 = 'B'; /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* Configure the system clock */ ...

User statistics

User Activity

STM32F429ZI UART5 data is received on terminal only for Baud rates 9600 & 4800 for higher baud rates we get garbage data. What can be the issue ?

Re: STM32F429ZI UART5 data is received on terminal only for Baud rates 9600 & 4800 for higher baud rates we get garbage data. What can be the issue ?

Re: STM32F429ZI UART5 data is received on terminal only for Baud rates 9600 & 4800 for higher baud rates we get garbage data. What can be the issue ?

Re: STM32F429ZI UART5 data is received on terminal only for Baud rates 9600 & 4800 for higher baud rates we get garbage data. What can be the issue ?