About JGood

JGood · 2019-10-12

The hardware of the circuit is similar to the draft below. Having trouble with programming to the vehicle. Need assistance programming to the board's specific pinout.

JGood · 2019-09-16

Using the google cloud platform, have connected via the STLINK, have configured the modem using the binary file provided for google cloud platform. Using an NBIOT external sim card but when the APN is set for C2C capability, the response on the termi...

JGood · 2019-08-12

Hi there,The aim is to connect to a vehicle and log its information through the module and display it on the computer. Not sure on which physical wiring connections are needed to the OBD pinout.Attempted using STM Cube to program using CAN interface ...

JGood · 2019-10-13

Hi there,My solution was to go to the project in the IDE (I used System workbench for eclipse).Go to Project --> Properties --> C/C++ Build --> Settings --> Tool Settings --> MCU GCC Compiler --> Pre-processor --> Then hit the little green "+" and ad...

JGood · 2019-10-13

/* USER CODE BEGIN Header *//** ****************************************************************************** * @file : main.c * @brief : Main program body ****************************************************************************** * @at...

JGood · 2019-10-13

So essentially use i want to sniff the data from my vehicle is sending. As a start i just want to be able to send and receive CAN messages, then I want to use that to ocnnect to the vehicle and receive the data and transmit it to be viewed on the PC....

User statistics

User Activity

I have a CAN transceiver circuit with the STM32L496 discovery board. How do i program the hardware to receive and transmit VEHICLE data?

My P-l496G-CELL02 C2C device won't connect.

How to connect STM32L496 board (with quectel BG96 module add on) to a vehicle's OBD?

Re: My P-l496G-CELL02 C2C device won't connect.

Re: I have a CAN transceiver circuit with the STM32L496 discovery board. How do i program the hardware to receive and transmit VEHICLE data?

Re: I have a CAN transceiver circuit with the STM32L496 discovery board. How do i program the hardware to receive and transmit VEHICLE data?