About RusikOk

RusikOk · 2023-02-06

how to bind the timer to a specific DMA channel?

RusikOk · 2022-11-10

Good afternoon!I have a problem with the operation of the DMAMUX module with synchronization from EXTI on STM32G031.my task is as follows:1) start reading SPI data after receiving EXTI event.2) after SPI data reading is finished, start sending data v...

uid address for STM8L051? · 2020-08-14

Hello!uid address for STM8L051?

RusikOk · 2020-02-11

good afternoon!I can’t read the FAULT state when the specified load limit is exceeded. the oscilloscope shows that the signal does not drop to a logical zero.my board

RusikOk · 2024-10-29

// Disable instruction cache prior to internal cacheable memory updateif(HAL_OK != HAL_ICACHE_Disable())Error_Handler();// read UIDuint32_t u0 = HAL_GetUIDw0(); // X, Y coordinatesuint32_t u1 = HAL_GetUIDw1(); // Lot number (ASCII encoded)// Re-enabl...

RusikOk · 2024-10-08

The problem was in Cyrillic. although there is no such problem for freeRTOS.

RusikOk · 2024-10-03

UINT nx_tcp_socket_queue_depth_notify_set(NX_TCP_SOCKET *socket_ptr, VOID(*tcp_socket_queue_depth_notify)(NX_TCP_SOCKET *));DescriptionThis service sets the transmit queue depth update notify function specified by the application, which iscalled when...

RusikOk · 2024-10-02

how to check how many descriptors are available? is there such a function?

RusikOk · 2024-09-25

STM32CubeIDE Version: 1.16.1 Build: 22882_20240916_0822 (UTC) - problem is presentI use a board of my own production and I noticed that when entering debugging CubeIDE resets microcontroller 3 times. and the reset signal of the core gets outside and ...

User statistics

User Activity

How to make DMA/SPI3 triggered by the TIM2 event STM32F745

stm32g031 problem DMAMUX module

uid address for STM8L051?

STSPIN250 EN/FAULT pin problem

Re: STM32H563 hard fault when trying to read UID

Re: Enabling LwIP in Nucleo-H563ZI

Re: nx_tcp_socket_send Cannot send continuously in while

Re: nx_tcp_socket_send Cannot send continuously in while

Re: NetXDuo issues after power loss