About Neolithic

Neolithic · 2023-12-14

Hi All, I have a setup where I bought a STM32F407ZET6 dev board from AliExpress and have been using for almost 6 years using STM32Cube IDE. It was only until i updated my IDE from 1.6 to 1.14 when it started saying that "Could not verify ST Device! P...

Neolithic · 2023-05-28

Hi,I have been trying to program W25Q16 external flash for Fast Read Dual Out mode. In this mode, basically both the lines MISO and MOSI become input for the host (STM32 in this case) and data can be read at double the speed. My SPI is running at 40M...

Neolithic · 2022-07-01

https://stackoverflow.com/questions/72826600/stm32f407ze-throws-hard-fault-on-executing-code-from-ramPlease check the details of my linker and startup scripts on the above link.

Neolithic · 2021-06-01

Hi I am using STM32F407ZET6 Microcontroller and I want to use multiple streams of DMA1. Is it possible to trigger two different streams of the same DMA for transferring data to two different peripherals simulatenously. (Like in Parallel).In the advan...

Neolithic · 2024-05-06

Yes, this is a different issue. You need to check your gdb settings. I would suggest you to keep using OpenOCD if that works.

Neolithic · 2024-05-03

Unfortunately not. The ST's own tech support suggested me to use cube ide 1.6.0 since this issue seems to be weird as the chip is not counterfeit. But, if you just use generic gdb debugging you can still do it with latest versions.

Neolithic · 2023-12-15

How do we fix it in higher versions? Clearly this is working perfectly until version 1.6 of Cube IDE. What is specifically changed which we can fix

Neolithic · 2023-12-15

The question is that even if this is some giga device thing, which i am not sure about, why cube ide 1.6 has no issue at all and higher versions have issue. What was changed and how to fix it?

Neolithic · 2023-12-15

Hi Jake. Thanks. When can I expect a reply?

User statistics

User Activity

STM32F407ZET6 Could not verify ST Device

How to Perform W25Q16 Fast Read Dual Output ?

STM32F407ze throws hard fault on executing code from RAM.

STM32F407ZET6, Is it possible for Multiple streams of a DMA to run in Parallel?

Re: STM32F407ZET6 Could not verify ST Device

Re: STM32F407ZET6 Could not verify ST Device

Re: STM32F407ZET6 Could not verify ST Device

Re: STM32F407ZET6 Could not verify ST Device

Re: STM32F407ZET6 Could not verify ST Device