About MMont.15

MMont.15 · 2019-04-16

Hi,I would like to say if it is possible to disable the automatic generation of the application code because it always overwrites what I change. For example, if I change something inside a driver file, when I compile, at first it automatically overwr...

MMont.15 · 2019-03-27

Hi,I would like to say if the FlexCAN inside the ST microcontroller SPC56EL70L5 supports the RX Individual Mask Registers (RXIMR). I read the CAN driver's implementation and it does not seem that these masks are implemented. Can I implement them?Than...

MMont.15 · 2019-04-03

Hi,I solved my problem with RXIMR registers. Now they work correctly. I have another open thread about RXFIFO, maybe you could help me. Thanks again for your help.Best RegardsMarco

MMont.15 · 2019-04-01

Ok I have understood what you say, but in my configuration I have FEN bit = 1 so the RXFIFO should be enabled. Nevertheless, I want to receive on the first available RX Message Buffer, that should be the MB8 ( I have another problem with the RXFIFO b...

MMont.15 · 2019-04-01

Hi Erwan,What do you mean with "Message Buffer mode"? I asserted the BCC bit in the MCR register in order to enable the RXIMR registers. Should I do other operations to use them correctly? Thanks.Best RegardsMarco

MMont.15 · 2019-03-28

Hi Erwan,I have already updated the "can_lld_start" function inside the "can_lld.c" file by setting the 32 RXIMR registers to a value. My problem is the following: I expect that if I set RXIMR8 = 0x00000000 (all don't care bits) than a message sent b...

User statistics

User Activity

Disabling of "Generation application code"

Utilisation of RX Individual Mask Registers in FlexCAN module (SPC56EL70L5)

Re: Utilisation of RX Individual Mask Registers in FlexCAN module (SPC56EL70L5)

Re: Utilisation of RX Individual Mask Registers in FlexCAN module (SPC56EL70L5)

Re: Utilisation of RX Individual Mask Registers in FlexCAN module (SPC56EL70L5)

Re: Utilisation of RX Individual Mask Registers in FlexCAN module (SPC56EL70L5)