About TThan

TThan · 2024-07-17

Hi all,some time ago I successfully developed a firmware for a ZigBee sleepy end device running on a STM32WB5MMG module. I could manage the module to draw only about 3µA in low power mode while still being able to communicate a button press over the ...

TThan · 2023-06-08

I have successfully implemented a ZigBee coordinator/router with an on/off-server-cluster based on a STM32WB5MMG module.My application is able to form a network and automatically allows certain off-the-shelf ZigBee On/Off-Clients to join the network ...

TThan · 2022-09-26

Hi All,Background: during my very first experiments with the STM32 Motor Control SDK 5.Y.2 I did hear something like a two tone alarm coming from the motor when a critical overcurrent or overload situation occured. I was pretty sure at that time, the...

TThan · 2022-09-01

Hi all,I try to implement a ZigBee device that acts as a Touchlink Target.My hardware is a STM32WB5MMG module. My debug UART is the LPUART1, no other UART configured.I use the STM32CubeMX 6.6.1 to generate the project and STM32CubeIDE 1.10.1 to compi...

TThan · 2022-08-24

Hi All,I am quite a newby regarding ZigBee since I have been playing around with this since bare a month now. So please be patient if my question might sound stupid or my terminology is not quite "ZigBee-conform".Short form of my question: Why do non...

TThan · 2024-01-27

Hello @Ouadi ,thank you very much for this helpful insight. I am sure this will help to improve the stability of my application. I also increased the SMPS output voltage of the coordinator module from the default 1.4V to the maximum 1.9V. This helps ...

TThan · 2024-01-25

Sorry for bringing this old thread back to the live, but I experienced almost the same issue as the thread opener.Using STM32WBxxx FW 1.18.0 my SED was not able to join the network with neither of the wireless stacks (FFD or RFD).I found the reason: ...

TThan · 2023-06-11

Found an answer myself by reading through ZigBee documents and made some experiments.To permit joining of new devices, when my device is a coordinater/router, I follow the procedure given in "16-02828-012-PRO-BDB-v3.0.1-Specification.pdf" figure 3:vo...

TThan · 2022-09-26

Hi Cedric,thank you very much for helping a blind man to find his project :beaming_face_with_smiling_eyes: Best Regards Thomas

TThan · 2022-09-26

Dear Cedric,please allow me one more question,When you say "select the ESC-G4 board from the example list" which application or web site do you have in mind?I did create some code from the MotorControl Workbench 5.Y.4 and 6.0.0, but none of them do h...

User statistics

User Activity

STM32WB5M sleepy end device low power issues - Revision X / Y as cause?

[solved] ZigBee Coordinator / Router: How to detect that joining periode is over and how to restart joining?

(Answered) MCSDK 5.Y.4: Use motor as speaker to output an audible Alarm (beep, siren, ...)?

STM32WB5MMG, is there a ZigBee Touchlink Example?

ZigBee Coordinator on STM32WB5MMG with Off-The-Shelf devices

Re: STM32WB55 Zigbee RFD firmware doesn't connect to network

Re: STM32WB55 Zigbee RFD firmware doesn't connect to network

Re: [solved] ZigBee Coordinator / Router: How to detect that joining periode is over and how to restart joining?

Re: (Answered) MCSDK 5.Y.4: Use motor as speaker to output an audible Alarm (beep, siren, ...)?

Re: (Answered) MCSDK 5.Y.4: Use motor as speaker to output an audible Alarm (beep, siren, ...)?