About ARich.6

ARich.6 · 2021-05-07

Hello,I'm struggeling a bit in understanding the whole features of possible RTC improvements. General information, right now I'm using a STM32L051 and a external 32,768kHz Oscillator for the RTC. It's working in general, but the OSC has +/-30ppm whic...

ARich.6 · 2021-04-15

Hello,I've tested a few weeks now without solution, hopefully somebody can help me with this topic.I try to reach the Low Power mode (LP Run or LP Sleep), but when I enter it, the consumption is still at 150µA (~270µA in debug mode). I even tested wi...

ARich.6 · 2020-12-02

Hello,I have problems installing the Cube Programmer. During installation it fails to execute some batch files (first one "populateApi.bat"). If I continue installation anyway, the installed Cube Programmer can't be opened and can't be uninstalled, o...

ARich.6 · 2021-05-07

okay thanks! I will check my options. Propably I'll be able to test the features with a development board with more/all Pins connectable.

ARich.6 · 2021-04-16

Hello again,I have to admit I've done some mistakes. Maybe the summary is helpful for others. But still there must be some improvement regarding the specs:It's not enough to unplug the Debugger USB cable. All cables (espacially VDD Pin1) must be unpl...

ARich.6 · 2021-04-16

Thank you Uwe Bonnes for the tip. Unfortunately other chips behave similar. I tested now with 6, one of them really seem to a defect (doesn't go to sleep mode at all).

ARich.6 · 2021-04-15

Additional information: Problem remains in Release build configuration (with Power Reset, no debugger connected). No big difference and power levels between 3V - 3,3VPower consumption only best-case at 150µA, sometimes higher up to 380µA under same t...

ARich.6 · 2020-12-10

Hi, just a sumary of my solution/workaround: I was able to get rid of the broken installation fragments:C:\Users\me\STMicroelectronicsC:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammerC:\Program Files (x86)\STMicroelectronics\STM32Cube...

User statistics

User Activity

Please help in general understanding of STM implemenation of RTC Calibration, Synchonization, Reference detection

Power Consumption in Low Power Mode nearly 100% higher than expected

STM32CubeProgrammer - Problem with installation (WIN10)

Re: Please help in general understanding of STM implemenation of RTC Calibration, Synchonization, Reference detection

Re: Power Consumption in Low Power Mode nearly 100% higher than expected

Re: Power Consumption in Low Power Mode nearly 100% higher than expected

Re: Power Consumption in Low Power Mode nearly 100% higher than expected

Re: STM32CubeProgrammer - Problem with installation (WIN10)