About Vsv.1

Vsv.1 · 2020-10-07

Hi ,. I uses LIS2DW12. I have seen that 6D orientation angle is from 45 or 50 degrees only. So setting an interrupt for this wont be useful for my purpose.I would like to wake up on minimum angle that I sets, say 5degree/10 degree . How could I achie...

Vsv.1 · 2020-09-17

Hi I have interfaced STM32L4 qspi with Winbond(W25N01GV). I am using HAL api's. The problem is erase/write to a page(2KB) address(say 0x0) repeats to the page after 512 KB(Say 0x80000) and so on. This is a 128 MiB NAND flash and erase command(D8h) o...

Vsv.1 · 2020-11-13

HI @Eleon BORLINI .Thanks Eleon.Yes I Have seen this. I will try with adding LPF2. But Is the stated behavior in my previous post is correct?. i.e. it cannot wake up with a slow tilt/rotation, (the requirement is ,ls2dw12 has to interrupt the mic...

Vsv.1 · 2020-11-11

HI @Eleon BORLINI .I followed the design tip and implemented as suggested . What I experienced is the wake-up can be obtained through a shock or shake, but a slow tilt cannot generate an interrupt. When setting 6D orientation functionality, I have o...

Vsv.1 · 2020-11-03

Hi @Eleon BORLINI YEs. but the problem is for 6D we need to cross the particular level. That is not helpful for small angle tilt detection.If the wake-up threshold interrupt can work for offset values set in x,y,z, that is what exactly I required(b...

Vsv.1 · 2020-11-02

Hi @Eleon BORLINI , please check my statements observed from the result from the above post. Correct me if I'm wrong A tilt interrupt is cannot be generated for the LIS2DW12, other than in 6D orientation interrupt.The only way towards this is , 1. G...

Vsv.1 · 2020-10-29

Hi @Eleon BORLINI . I was waiting to get my hardware which took for a rework and I have checked the scenarios. The accelerometer read and calculating angle seems almost correct by the way you suggested for each axis, from 0 to but a maximum 85-86 de...

User statistics

User Activity

Flexible Tilt angle measurement/interrupt in LIS2DW12

QSPI of STM32L496A

Re: Flexible Tilt angle measurement/interrupt in LIS2DW12

Re: Flexible Tilt angle measurement/interrupt in LIS2DW12

Re: Flexible Tilt angle measurement/interrupt in LIS2DW12

Re: Flexible Tilt angle measurement/interrupt in LIS2DW12

Re: Flexible Tilt angle measurement/interrupt in LIS2DW12