About leonardo2

leonardo2 · 2016-12-21

Posted on December 21, 2016 at 14:31Good morning,In my project I use STM32F303RC and I have two ADCs working with DMAs and triggered by a timer. ADC1 has two analog channels to be sampled, ADC4 only one. While I was working with CubeMX 4.17 I had no...

leonardo2 · 2016-11-22

Posted on November 22, 2016 at 09:43Hallo,I am trying to solve this problem that I am facing with ADC and DMA use.I use a STM32F303 Microcontroller, with CubeMX vers4.17 and Eclipse.I was able to test and use all the peripherals I needed but I encou...

leonardo2 · 2017-01-05

Posted on January 05, 2017 at 09:54Hi Jeremy,Here are the configurations. What I can tell you is that in my situation the data were saved randomly in the same array, unfortunately there was no logic, no divisio between the two channels./* ADC1 init ...

leonardo2 · 2016-11-25

Posted on November 25, 2016 at 09:08I solved the problem this way, I changed this line(s) in the code:HAL_ADC_Start_DMA(&hadc1, (uint32_t*)ADC1ConvertedValues, 2048)to thisHAL_ADC_Start_DMA(&hadc1, ADC1ConvertedValues, 1024)bye

leonardo2 · 2016-11-04

Posted on November 04, 2016 at 12:07Hi McCliff,I work on a configuration that is like yours:A board with STM32F1 that samples data and act as a server, in order to send a stream of data to the connected client Computer.I already took a look at the e...

leonardo2 · 2016-11-04

Posted on November 04, 2016 at 11:40Hallo,I had problems with the reset part of the CubeMX code and I found out aobut the wrong PA8 setting.I think hat the bug is still there in version 4.17.thank you

leonardo2 · 2016-11-03

Posted on November 03, 2016 at 18:07Hallo,I also had this problem and got stuck in this reset loop.I solved the situation by setting the MCO GPIO pin frequency to High, because CubeMX set it to Low as default value.CubeMX -> Configuration -> GPIO ->...

User statistics

User Activity

Cubemx 4.18 ADC Configuration change

STM32F3 two ADC with DMA transferred data mixup [SOLVED]

Re: STM32F3 two ADC with DMA transferred data mixup [SOLVED]

Re: STM32F3 two ADC with DMA transferred data mixup [SOLVED]

Re: Optimizing TCP server [LWIP]

Re: STM32CubeMX and LWIP on STM32F107

Re: STM32CubeMX ethernet on stm32f107