About swd

swd · 2023-06-05

Does the LIS2DE12 have a soft reset ? Data sheet is unclear

swd · 2021-01-04

LIS2DW Please advise how to use the "stationary" feature of this device. ? It doesn't seem to do anything. The LIS2DW is using LIS2DW12_STREAM_MODE and this is fine. We need to know if the device is stationary to decide if it's worth processing the d...

swd · 2023-06-07

Hi Frederica, Many thanks for that. Would writing back the register values reset it ? Do we need to power cycle it ? My worry is that over a period of years it may need some kind refresh ?If no refresh is needed then we can proceed to power up when t...

swd · 2023-06-05

I am worried that over time a reset may be necessary to recalibrate. In this design the power is on for 10 years. Any workaround ?

swd · 2021-01-18

Hi Eleon. I believe these two commands are not overwriting each other as they are bit fields. When I get the chance I will check. Best wishes Simon

swd · 2021-01-07

Hi Eleon, Thanks for that. We are using LIS2DW12. This was the set up: //lis2dw12_wkup_threshold_set(&dev_ctx, 5); //set to 512 * 5 = 2,560 //lis2dw12_act_mode_set(&dev_ctx, 1); //sleep on //lis2dw12_act_mode_set(&dev_ctx, 2); //stationar...

swd · 2015-10-08

Posted on October 08, 2015 at 10:01Does anyone know if the USB3317 works ? The data sheet doesn't mention LPM.ThanksSimon

User statistics

User Activity

Does the LIS2DE12 have a soft reset ?

LIS2DW Please advise how to use the "stationary" feature of this device ?

Re: Does the LIS2DE12 have a soft reset ?

Re: Does the LIS2DE12 have a soft reset ?

Re: LIS2DW Please advise how to use the "stationary" feature of this device ?

Re: LIS2DW Please advise how to use the "stationary" feature of this device ?

Re: STM32F2/F4 problems with various ULPI USB PHYs