About ZTale.1

ZTale.1 · 2023-02-25

helloi am working on a custom bootloader or STM32F405.the Flash process is done correctly by the Bootloader, i checked the content of the flash.the problem happens when the bootloader jumps to the application firmware which is located at adress 0x080...

ZTale.1 · 2020-04-15

hellocan i use STM32F479 DSI host interface to connect with Raspberry Pi camera ( this camera has the same interface ).regards.Zakaria

ZTale.1 · 2020-04-05

helloi am designing a custom board and i need to interface a PI camera with MIPI-DSI interface.i need to know if the video data provided by the PI-camera is handled by the STM32F479VI MIPI-DSI interface.regards.Zakaria

ZTale.1 · 2023-02-25

hiFinally i found the problem , the last byte of the BIN file was not programmed as shown in picture : it is a stupid error, as i checked the content of the flash.thanks a lot for the help Tesla and Gbm

ZTale.1 · 2023-02-25

i replaced the lines 224..226 and same problem.

ZTale.1 · 2023-02-25

the hardfault handler is called on the application side.

ZTale.1 · 2023-02-25

hi GBM, thanks or the answeri checkd VTOR and it is loaded with 0x0800c000.this is the content of 0x0800c000 in flash memory :

ZTale.1 · 2023-02-25

hi thanks Tesla,this is the last instruction before doing the jump to main : this is also the flas memory part so you can see the R0 adress content :

User statistics

User Activity

custom bootloader problem on STM32F405

STM32L4 DSI camera

STM32F479VI MIPI-DSI interfacing with PI camera

Re: custom bootloader problem on STM32F405

Re: custom bootloader problem on STM32F405

Re: custom bootloader problem on STM32F405

Re: custom bootloader problem on STM32F405

Re: custom bootloader problem on STM32F405