About Karthik Kumar

Karthik Kumar · 2023-04-11

Hello Every one I am using NUCLEO-G0B1RE board when trying to store the data in to flash memory address its not updating after erasing but individually if I try only erase or only write data in to flash memory it is working please suggest me below is...

Karthik Kumar · 2022-11-07

Karthik Kumar · 2022-08-29

Hello Every One!! I am Using NUCLEO G0B1RE Board, facing Issue with CAN Receive Function I am using MICROCHIP CAN BUS ANALYSER and NUCLEO BOARD for CAN Communication void CAN_Recieve(void){ while( (HAL_FDCAN_GetRxFifoFillLevel(&hfdcan1,FDCAN_RX_FIFO0...

Karthik Kumar · 2022-05-18

Hello every one!!!!I am facing a problem when I am opening the ST-link utility I have attached a file with screen shot please help me to solve the issue

Karthik Kumar · 2022-01-04

Karthik Kumar · 2023-04-11

Hello @Sarra.S Thank youfor your Response, I got the issue after adding this HAL_FLASH_GetFlagStatus() function.Please guide me I have shared screen shot below.

Karthik Kumar · 2023-04-11

@Javier Muñoz thank you for your response, Issue is resolved. I am using the Polling method for CAN transmit..

Karthik Kumar · 2022-11-07

I have connected proper connections. For me CAN receive is working but getting error at CAN transmit.

Karthik Kumar · 2022-08-29

Dear@NWeis.19 So writing GPIO_PIN_SET to a pin that is input before we set it to be an output PP seems like a bug or rendering order.GPIO MODER is in output Mode??

Karthik Kumar · 2022-05-18

@Community memberThank you for your response!!I have downloaded and installed the packages and I have successfully opened the ST-link utility its working now.

User statistics

User Activity

Programming a Data in to Flash memory STM32G series

While i am transmitting CAN_Tx data for every 1 second and checking in microchip CAN Analyzer but it showing error passive. Please find the attached software and microchip CAN Analyzer data below. Please support this issue to solve the problem.

FDCAN Receive data issue in STM32G0B1RE

Facing a Problem with the ST-link utility Application

Hello experts!! i am using stm32f030c6t6 i have created a led blink project on CubeMx and imported to Keil IDE i want to generate BIN file please help me to creation of BIN file in my project folder

Re: Programming a Data in to Flash memory STM32G series

Re: While i am transmitting CAN_Tx data for every 1 second and checking in microchip CAN Analyzer but it showing error passive. Please find the attached software and microchip CAN Analyzer data below. Please support this issue to solve the problem.

Re: While i am transmitting CAN_Tx data for every 1 second and checking in microchip CAN Analyzer but it showing error passive. Please find the attached software and microchip CAN Analyzer data below. Please support this issue to solve the problem.

Re: Hi, I see something that looks like a bug in CubeIDE 1.10.1

Re: Facing a Problem with the ST-link utility Application