About MTriv.2

MTriv.2 · 2022-11-04

MTriv.2 · 2022-07-24

Hi all,I have my own customized board based on STM32WB55RGV6. The board has HSE of 32 MHZ but don't have LSE. I am using LSI or (HSE/32) as RTC clock and HSE/1024 as RF wakeup clock. I am facing two different problems.Case 1: First I tried with examp...

MTriv.2 · 2022-11-09

While Debugging it was never an issue. Just when no debugger connected and powered on then issue was there. However issue resolved.I just wrote an LED turned on instruction after each line one by one before while loop and found that LED turned on be...

MTriv.2 · 2022-07-27

Thank you so much @Remy ISSALYS this really solved the issue. I forgot to enable calibration for the clock...

User statistics

User Activity

Board based on STM32WB55. My application program doesn't start when powered on. I need to connect and disconnect the board to STM32cube Prg to start execution. Option bytes settings: nBOOT0 = 1 nBOOT1 = 1 nSWBOOT0 = 0 BOOT0 pin floating.

HardFault occurs while trying to run STM32WB55 BLE examples on custom board.

Re: Board based on STM32WB55. My application program doesn't start when powered on. I need to connect and disconnect the board to STM32cube Prg to start execution. Option bytes settings: nBOOT0 = 1 nBOOT1 = 1 nSWBOOT0 = 0 BOOT0 pin floating.

Re: HardFault occurs while trying to run STM32WB55 BLE examples on custom board.