About thomasblender9

thomasblender9 · 2010-06-02

Posted on June 02, 2010 at 23:10DFU Bootloader don't execute code

thomasblender9 · 2010-05-21

Posted on May 21, 2010 at 13:00Adapt USB DFU Bootloader to STM32F103VET6 #stm32

thomasblender9 · 2010-03-06

Posted on March 06, 2010 at 19:25Hello, where do I find the ''stm8s_fwlib_um.chm'' file? In the user manual document 16499.pdf is in chapter 3.1.2 the description for the STM8S standard firmware library online help. But that file isn't in the firmwa...

thomasblender9 · 2011-05-17

Posted on May 17, 2011 at 13:53I forgot to change linker script. Now it works fine.

thomasblender9 · 2011-05-17

Posted on May 17, 2011 at 13:51Hello, I solved the problem. It was a problem of clock configuration. I set the USB clock RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5); so the PLL should be 72MHz. The crystal in PRIMER2 is 12MHz. Thank you for yo...

thomasblender9 · 2011-05-17

Posted on May 17, 2011 at 13:51Hello STOne-32, thank you for your answer. I replaced this lines in the header file. The result is better than my first try. Now I have a reaction from Windows. Unfortunately I got the message USB-Device not recognized...

thomasblender9 · 2010-03-06

Posted on March 06, 2010 at 19:33I had the same problem. I solved it in Windows 7 by edit the properties of C:\Program Files\STMicroelectronics\st_toolset\stvd\stvdebug.exe. Change to tap compatibility and enable run as admin.

User statistics

User Activity

DFU Bootloader don't execute code

Adapt USB DFU Bootloader to STM32F103VET6

where to find STM8S standard firmware library online help

Re: DFU Bootloader don't execute code

Re: Adapt USB DFU Bootloader to STM32F103VET6

Re: Adapt USB DFU Bootloader to STM32F103VET6

Re: ST-Link requires admin rights...?