FAQs
cancel
Turn on suggestions
Showing results for 
Search instead for 
Did you mean: 

Does stm32CubeProgrammer V 2.1.0 work with STM32MP1...Disco?

Go to solution
Uwe Bonnes
Principal III

‎2019-06-28 4:49 AM

Hello,

my STM32MP1157C-DK2 is up and running. I can use the Stlink with other tools. However stm32cubeprogrammer does no show the disco stlink. Is this a know issue?

0 Kudos
This discussion is locked. Please start a new topic to ask your question.
1 ACCEPTED SOLUTION

Accepted Solutions
Go to solution
Olivier GALLIEN
ST Employee

‎2019-07-03 4:49 AM

Hi @Uwe Bonnes​ 

Yes STM32CubeProgrammer is woking for STM32MP1 Disco board but does not use STLink to flash the board but USB.

Please refer to :

https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157C-DK2/Let%27s_start/Populate_the_target_and_boot_the_image

Hope it help

Olivier

Olivier GALLIEN
In order to give better visibility on the answered topics, please click on 'Accept as Solution' on the reply which solved your issue or answered your question.

View solution in original post

0 Kudos
1 REPLY 1
Go to solution
Olivier GALLIEN
ST Employee

‎2019-07-03 4:49 AM

Hi @Uwe Bonnes​ 

Yes STM32CubeProgrammer is woking for STM32MP1 Disco board but does not use STLink to flash the board but USB.

Please refer to :

https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157C-DK2/Let%27s_start/Populate_the_target_and_boot_the_image

Hope it help

Olivier

Olivier GALLIEN
In order to give better visibility on the answered topics, please click on 'Accept as Solution' on the reply which solved your issue or answered your question.
0 Kudos
Top