2020-08-24 10:00 AM
Hi,
The second activation pattern 11 for STM32G03xxx in Table 2 in the AN2606 Revision 44 seems to be wrong, the "nBOOT0_SEL (bit)" has to be set to 0 not 1, since =0 means that the Boot pin state is relevant, =1 means it is irrelevant
2020-12-08 12:49 AM
Hello,
I have passed the error along to our team for fix.
Your feedback has been taken into account in the new release.
Thanks for your contribution.
Regards.
Imen GH
