Solved

Hello,I wrote a Boot program in flash to initialize sdram and copy the app program to run in sdram. The current state is able to jump and run normally, but the length of jump time seems to be positively correlated with the size of global variables in my app. For example, if I define a 1MB size array in the app and use it, the jump time will be significantly longer for several seconds,May I ask why this is, is there any way to solve this problem? Thanks！

Hello,I need guidance to create a very simple AI project using CubeIDE (CubeMX) and Neural-ART runtime. I can use all the example projects successfully but failed to create one from scratch till now. I faced no challenge earlier when using H7 for my AI projects.I am using STM32N6570-DK. I tried using different ways, but I either got strange compilation/linking errors or got stuck in the neverending "Generating code" screen.Anyway, my latest attempt is as follows:Create a new FSBL project by selecting my DKChose not to initialize default peripheralsSelected X-CUBE-AI 10.0 core and template application from the Middleware sectionSelected a MobileNetV2-based tflite model and Neural-ART runtime.Analyzed using "n6-allmems-O3" and generated code. Everything is OK so far.Tried to build and got errors and warnings.Errors and warnings:RIF-related error/warning in app_x-cube-ai.c.  ./X-CUBE-AI/App/app_x-cube-ai.c: In function 'MX_X_CUBE_AI_Init': ../X-CUBE-AI/App/app_x-cube-ai.c:100:5:

I'm using the Nucleo-F302R8 and the X-Nucleo-IHM07M1 with the small kit motor it comes with.  I'm having trouble getting the motor profiler to connect to the board.The F302R8 seems to have the demo motion program running, since I can hit the blue button to start the motor turning.  But if I want to run the profiler windows application and try to connect to the board, I get this error:"Port Open and try to configure the board"I've tried updating STLink, and it's on the latest (v2.j37.m26).  I've updated my USB driver.  I can connect to the board using ST-Link Utility.  But the motor profiler can't connect.What might be preventing motor profiler from connecting? 

Hello, Just a quick question as I need confirmation :Using a STM32H7 ADC in a differential input mode, does this circuit work ?  The output of the op-amp is Vout = G * (Vin[+] - Vin[-]) + 1.65 .Then the ADC output should be between :[0 - INT16_MAX] when op-amp output is between 1.65V and 3.3V.[INT16_MIN - 0] when op-amp output is between GND and 1.65V.But from the datasheet it says that CMV (average between INP and INN) should be around Vref+/2. I'm not sure that's true here.So can you confirm this wont work and I should do single-ended and substract 1.65V from the result ?Regards, Adrien 

I have a project running on my Stm32H7. I imported my ethernetif/lwip settings from the Stm32CubeH7 H723 lwip + freertos http server example, but made some small changes. For the most part in the most basic sense, the driver works and my board at least gets a DHCP lease and responds to ping, but I am getting an assert:"Assertion "pbuf_free: p->ref > 0" failed at line 753 in [......]/LwIP/src/core/pbuf.c"I've read so many topics on the state of Ethernet in the Stm32H7. Because of the ST community manager locking threads where fixes are discussed, I honestly don't know the current state of the drivers, except I can guess that this is an issue having to do with pbufs getting clobbered. I've seen the large zip file from https://community.st.com/t5/embedded-software-mcus/bug-fixes-stm32h7-ethernet/td-p/281420, but I don't know how out of date this is or how many of these issues have truly been fixed now. If the drivers in the CubeH7 drivers are working, what am I doing

Has anyone here tried to stream Youtube or old playing games on STM32MP257?144p, 240p, 360, 780p, 1080p etc. Quake, Doom, Half-Life, perhaps Half-Life 2 as well. What was your experience and limitations? Very curious to know.  

Hi folks,I am trying to implement a dual bank OTA system on my STM32F429IGT6 using DBM1 and BFB2 in the STMCubeProgrammer, but I'm having trouble booting into the second flash region (which I will call app_b from now on, along with app_a for the first flash region). By my logic, each app will have 512KB of flash memory, so app_a will start at 0x08000000, and app_b will start at 0x08080000. Through some online digging, I saw that having one linker script per app is what I should be doing, with each app's flash being its address that I mentioned before, but then set the app_b vector table offset to 0x00080000, so theoretically app_b can start at 0x08080000 because that's the result from the OR operation of 0x08000000 and 0x00080000. So here is my normal testing routine: Build App_A, note version number --> generate a .bin file through a post build commandFlash App_A with start address 0x08000000 in the CubeProgrammerAppend Version Number to see changeBuild App_B --> generate .

Hi Team,I'm currently transitioning from using UART interrupt with timeout to DMA-based reception on an STM32G4 controller. I’d like to implement a similar behavior where I can detect the end of a UART message using idle line detection while receiving data via DMA.Is there a recommended way to combine DMA reception with UART idle timeout on STM32G4? Specifically:Are there any best practices or example configurations for this setup?

Hello, st:The board I have on my hand is stm32mp257f-ev1.Now I have a problem. The gstreamer cannot work properly when playing mp4 format video.Does the h264 decoder need to be activated or enabled?I run this commandgst-launch-1.0 playbin3 uri="file:///home/root/Videos/2002.mp4"here is the error:and also the gst-discovery-1.0root@stm32mp2-e3-c2-aa:~# gst-discoverer-1.0 Videos/2002.mp4 Analyzing file:///home/root/Videos/2002.mp4 Done discovering file:///home/root/Videos/2002.mp4 An error was encountered while discovering the file Failed to configure H264 decoderIt seems that I can play webm format video but not mp4.I tried the software decode avdec_h264, but it only has 15 fps.But in fact the h264 plugin has been installed on my board.root@stm32mp2-e3-c2-aa:~# gst-inspect-1.0 | grep h264 codectimestamper: h264timestamper: H.264 timestamper libav: avdec_h264: libav H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 decoder rtp: rtph264depay: RTP H264 depayloader rtp: rtph264pay: RTP H264 payloa

I have developed software on the Nucleo-L433RC-P development board which uses the STM32L433RCT6P MCU (the P defines it has 2 x VDD12 pins for an external SMPS).However, I have designed a PCB that uses the STM32L433RCT6 (no VDD12 pins) but want to continue developing the software on the development board until my PCB arrives.To retarget the MCU, I edited the .ioc file and changed STM32L433RCTxP to STM32L433RCTx.I flashed the software to the Nucleo-L433RC-P board, but I am getting strange and random issues.It seemed to work to start with, but after several further flashes it stopped working with the error shown below...I'm not sure but it seems to go to a reset handler in "startup_stm32l433rctxp.s"....The console shows the following error...STMicroelectronics ST-LINK GDB server. Version 7.11.0 Copyright (c) 2025, STMicroelectronics. All rights reserved. Starting server with the following options: Persistent Mode : Disabled Logging Level : 1 Listen Port N

Hello,I'm encountering an issue while testing the Standby Mode on my device.Most of the time, the device enters and wakes from Standby Mode successfully. However, after repeated testing, it occasionally fails to enter the mode.What could be the potential causes for this failure?Any suggestions on how to approach debugging this would be greatly appreciated.Thanks. 

Steps to reproduce:Connect NUCLEO-H563ZI to host with USB-C (STLINK)Open STM32CubeProgrammer GUISelect option bytes in side bar (OB icon)In the middle right, click on the drop-down on the "Read" buttonSelect "Reset MCU to Factory Settings"Click "Start Factory Reset"Expected behavior: All option bytes reset to factory settingsActual behavior: Only "Performing system reset." action goes to "PASSED" status, a few seconds later a segmentation fault happens, likely during the "Setting TZEN=B4" phase, and the GUI disappears Console log output:The Analytics API is not enabled The Analytics API is not enabled Loading PRG Library: /opt/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin/../lib/libCubeProgrammer_API.so 99 external Loader list # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f5ae492eb14, pid=69214, tid=0x00007f5aedbbd6c0 # # JRE version: OpenJDK Runtime Environment (8.0_432-b07) (build 1.8.0_432-b07) # Java VM: OpenJDK 64-

I have 4 screens in my application and I want to change screens from code. For instance, I have a dynamic list of item in a View and, depending on which element is currently selected, at the press of a button it should take to another screen.I generated the methods to change screen by setting Interactions from Designer FX that I know for sure they will not be triggered. So a simple `application().gotoMyScreenNoTransition()` in the same View should work.However, when writing the method inside the View to call from the Presenter, I see that the applications blocks on the function `makeTransition`. I don't even execute that methods that changes screens, simply writing the code to do that seems to block the whole process.This is where I get blocked:Remind that I don't even define the transitions by myself, so I should not edit the FrontendHeap, should I?

I have a STM32H730 device, with a STLINKV3-SET connected via SWD (3 pins).When I Connect using STM32CubeProgrammer I get the following popup message;Error: Database: There's no active configuration for this device. All the 4 configurations are disabled!However the Connection appears to be okay, I can read/modify the SRAM memory and erase the Flash.So what does this error mean?Does is need to be addressed? I have updated STM32CubeProgrammer and the STLINKV3-SET firmware to latest.Thank you.   

Hello,I'm working on an adapter USB to Ethernet and it is working only as a DEVICE. Now I would like to do the same but I want my STM to work as HOST.Is ST providing the same code stm32-mw-usb-device but for host?Thanks,G.

Hello,Do I need to change the version of STM32CubeProgrammer, or is it just an incorrect setting in the .pro file? Please help me fix it. Thank you in advance.//---------------------------------------------------------------------------------------------------- Environment ubuntu 22.04 Qt 6.5.3 qmake version 3.1 STM32CubeProgrammer 2.18.0 gcc version 11.4.0 //-------------------------------------------------------------------------------------------------------- qt pro file QT += core gui greaterThan(QT_MAJOR_VERSION, 4): QT += widgets CONFIG += c++17 #DEFINES += QT_NO_VERSION_TAGGING # You can make your code fail to compile if it uses deprecated APIs. # In order to do so, uncomment the following line. #DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000 # disables all the APIs deprecated before Qt 6.0.0 SOURCES += \ main.cpp \ mainwindow.cpp \ stm32downloader.cpp \ upgradeFirmware.cpp HEADERS += \ mainwindow.h \ stm32downloader.h FORMS += \ mainwindow.ui # Default rules for d

Hi all,I'm working with the STM32F769I-DISCO board and using TouchGFX for GUI development. When I build and flash the project through STM32CubeIDE, everything works fine — the LCD displays as expected.However, when I flash the generated .hex file using STM32CubeProgrammer, the board resets and runs, but the LCD stays blank. I’ve verified that the program is running (e.g., with an LED), but no graphics appear.Here’s what I’ve already done:SDRAM is initialized via MX_FMC_Init(), and it calls BSP_SDRAM_Initialization_Sequence().LCD and DSI are initialized in MX_LTDC_Init() and MX_DSIHOST_DSI_Init().TouchGFX is initialized using MX_TouchGFX_Init().The framebuffer is mapped to SDRAM (0xC0000000).Boot config and option bytes are correct (BOOT from main flash).The .hex and .bin are both generated and tested — same issue.Backlight GPIO is set high manually.It seems like CubeIDE is doing something extra that CubeProgrammer does not — possibly initializing QSPI, DSI, or loading something into RA

Title edited to "STLINK-V3MODS"Hello ST,Do you perhaps have an STEP or IGS file of the STMV3MODS module ?Thank a lot.   

Hello ST Community,I am currently using the EVSPIN32F0251S1 inverter board to control a BLDC motor in an elevator door control application.When I run my BLDC motor in torque mode and set torque with this api  MC_ProgramTorqueRampMotor1_F() so my motor is rapidly rotating and after 1 second it will give me startup failure error.Thank you in advance for your support. Best regards,Vedant Kachhadiya

Hello, I have a problem with a PCB with an STM32F410. This board is used in the field, and in some cases, it freezes, and only works by reflashing the firmware. We're using some data in the Flash (emulated EEPROM) to write data, about 18 bytes, written to sector 1 of the flash. When reading these microcontrollers that came from the field, I notice that sector 0 has invalid data, preventing the microcontroller from booting.The writes are performed sporadically according to certain button commands, and only the read is performed when the code starts to check the status of these variables.I performed several bench tests with noise generators and several continuous writes to memory to see if this could be a problem, but I was unable to reproduce the problem. My power supply is stable, and when I input electrical noise signals, the microcontroller freezes, but it recovers after a watchdog reset.I also reviewed the PCB to check for layout issues, but I didn't find anything that could cause a

HelloI have two boards. Both of them are based on STM32 MCUs. One is a SPI master and the second is a SPI slave.Settings for master (STM32H723): mHandle.Init.Mode = SPI_MODE_MASTER; mHandle.Init.Direction = SPI_DIRECTION_2LINES; mHandle.Init.DataSize = SPI_DATASIZE_8BIT; mHandle.Init.CLKPolarity = mSclIdle == SclIdle::kLow ? SPI_POLARITY_LOW : SPI_POLARITY_HIGH; mHandle.Init.CLKPhase = mSclEdge == SclEdge::k1 ? SPI_PHASE_1EDGE : SPI_PHASE_2EDGE; mHandle.Init.BaudRatePrescaler = mPrescaler; mHandle.Init.FirstBit = SPI_FIRSTBIT_MSB; mHandle.Init.TIMode = SPI_TIMODE_DISABLE; mHandle.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; mHandle.Init.CRCPolynomial = 0x00; mHandle.Init.NSS = SPI_NSS_SOFT; mHandle.Init.NSSPMode = SPI_NSS_PULSE_DISABLE; mHandle.Init.NSSPolarity = SPI_NSS_POLARITY_LOW; mHandle.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA; mHandle.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN; mHandle.Init.RxCRCInitializationPattern = SPI

Hi,I would like to use the VIPER319HDTR and would like to check the thermal to see if Tj will be an acceptable value.However, the switching losses of the internal FET are not mentioned. Is the switching time of the internal FET known? Or is there another way I can verify the thermals of the device?Thank you in advance!Kind regards,Beau Wilmink

Hello, I'm using Nucleo-WL55JC cards and I wanted to know if it was possible to use them as gateways, partly to connect the radio world to the internet (LoRaWAN), and partly to extend the range of my network (by dispersing multiple gateways everywhere).Note: there would only be a single "sensor" device that would send its data to the nearest gateway. This "sensor" device is also a Nucleo-WL55JC. Thanks in advance. Best regards, KYZ.

Hi!I have the STEVAL-PROTEUS with FP-SNS-DATAPRO1 v1.1.0 programmed on it.Everything works now as expected, except this: Once I completed a sensor acquisition, I cannot configure the board to a mass storage device to retrieve the data file on my PC. And yes, I connect it with a USB cable.According the "Quick Start Guide", it should be done inside the BLE sensor app selecting the "Proteus Data Logging" demo settings. But there is no hamburger button as described in the manual! I only see a list of Sensors. I have ST BLE Sensor v5.2.5 on iPhone.I also tried to change my profile to expert, but it remains to say "I am a beginner" somehow....Any idea's? I miss something here....BR Martin   

Hi all,I am working on a QSPI driver for W25Q512 flash memory (extloader for stm32cubeprogrammer and main firmware driver). I had a look at the errata ES0392 - Rev 13 and I have a question about paragraph 2.8.4: 2.8.4 - QUADSPI internal timing criticality --------------- Description The timing of some internal signals of the QUADSPI peripheral is critical. At certain conditions, this can lead to a general failure of the peripheral. As these conditions cannot be exactly determined, it is recommended to systematically apply the workaround as described. ... [omissis]   I have applied the suggested patch on the "external loader" driver and there is no particular problem in applying it,  but I have also the "very similar" driver on the main application firmware in processor.   Up to now I had no errors in the main firmware qspi driver : read and write are ok also without the patch.   Applying the patch on the "main firmware" needs testing and I have to schedule this te