About zom

zom · 2024-12-06

I can write and read byte, float or text on the eeprom. And I was thinking that is Ok with the processes of wiriting and reading. But when I tried that with the group of data, it appeared that something is wrong. It means that when I first write goup...

zom · 2024-08-17

St-link utility does not start in windows11. How to manage this situation?mfc140 was copied to windows11 (system(32also), VC++ was also installed but all in vain..

zom · 2024-08-11

What should I do when stm32 applications do not see st-link and the message I always receive is: Failed to start GDB serverFailed to start GDB serverError in initializing ST-LINK device.Reason: (2) ST-LINK DLL error.No matter which stm32 board or cab...

zom · 2024-12-07

I have noticed on the osciloscope that saved and read data are exactly the same as I obtained by the uart. bytes written:Test byte to write into EEPROM: spi_buf = 0xA0Test byte to write into EEPROM: spi_buf = 0xA1Test byte to write into EEPROM: spi_b...

zom · 2024-12-06

Accordin datasheet EEPROM SPI 25LC020A is 8 bit addressing.I have noticed on the osciloscope that when read data is not correct the MOSI signal for the corresponding writing data is not as should be, so Im not suprised that I cannot obtain the right ...

zom · 2024-08-14

zom · 2024-08-13

It seems it is firewall issue. I have to test it more. Thank you very much.

zom · 2024-08-12

STM32CubeProgrammer does not connect. Windows10. Software - latest.

User statistics

User Activity

data saved on external EEPROM SPI 25LC020A are not read correctly

st-link utility in windows11 not starting

GDB server

Re: data saved on external EEPROM SPI 25LC020A are not read correctly

Re: data saved on external EEPROM SPI 25LC020A are not read correctly

Re: GDB server

Re: GDB server

Re: GDB server