Posted on November 20, 2015 at 04:24I use TIM2. I configure device using this codeint main(){  ...        TIM2->CR1 = 0;      TIM2->EGR = 0;      TIM2->PSC = 59;      TIM2->ARR = 4999;      TIM2->DIER |= TIM_DIER_UIE;      TIM2->SR = 0;             ...

Posted on February 26, 2015 at 05:00Hello. I created MODBUS firmware bootloader and it works good, but when I upload main firmware it does not program flash. Bootloader is compiled with base 0x08000000 and uploaded by JTAG. Then main firmware is com...