About Perumalsamy

Perumalsamy · 2024-02-08

Hi I am using the LIS2MDL Magnetometer, which is connected to i2c0 on my custom board. I have enabled the respective kernel configuration for the magnetometer.CONFIG_IIO_ST_SENSORS_I2C=yCONFIG_IIO_ST_SENSORS_SPI=yCONFIG_IIO_ST_SENSORS_CORE=yCONFIG_II...

Perumalsamy · 2024-01-14

Hi,I have successfully connected the LIS2MDL magnetometer to my reference board via I2C, and it is detected. However, after enabling the necessary kernel configurations and device tree, it indicates that the VDD supply is not found, and it resorts to...

Perumalsamy · 2024-02-09

Thank You @Federica Bossi

Perumalsamy · 2024-02-09

Hi @Federica Bossi I able to rectify the "unable to find the vdd supply" But now I got got into the below error.[ 4.648014] st_lsm6dsx_i2c 0-006b: mounting matrix not found: using identity...[ 4.661308] st-magn-i2c: probe of 0-001e failed with error ...

Perumalsamy · 2024-02-06

Hi @Federica Bossi Thank you for your help. Is there any changes I need to done on the device tree part. Can you give me a example device tree for LIS2MDL Magnetometer.

Perumalsamy · 2024-02-04

If there is a generic driver available for LIS2MDL, kindly assist me.

Perumalsamy · 2024-02-01

I am connected these pins in the i2c. I need only these pins 3v3, GND, SDA and SCL. If the above mentioned pins are need to be connected, kindly assist me.

User statistics

User Activity

LIS2MDL Magnetometer unable to find vdd supply

LIS2MDL Magnetometer Probe failed and Vdd power supply not found, dummy regulator issue

Re: LIS2MDL Magnetometer unable to find vdd supply

Re: LIS2MDL Magnetometer Probe failed and Vdd power supply not found, dummy regulator issue

Re: LIS2MDL Magnetometer Probe failed and Vdd power supply not found, dummy regulator issue

Re: LIS2MDL Magnetometer Probe failed and Vdd power supply not found, dummy regulator issue

Re: LIS2MDL Magnetometer Probe failed and Vdd power supply not found, dummy regulator issue