About nebelgrau77

nebelgrau77 · 2022-11-28

I'm trying to understand the way the interrupt thresholds are supposed to be set for this sensors, as we're working on a driver in Rust and wanted to add the interrupts as a feature. Let me explain what I mean:Accelerometer: each axis uses one full ...

nebelgrau77 · 2021-12-28

The description of the threshold registers says: "The value is expressed in 15-bit unsigned. Even if the threshold is expressed in absolute value, the device detects both positive and negative thresholds.".There is only one threshold to be set, desp...

nebelgrau77 · 2022-01-28

~Thank you!

nebelgrau77 · 2022-01-26

Hi Eleon,I have one more question regarding the interrupts, this time XL/G. The STATUS_REG has two bits: IG_XL and IG_G, that go high when "one or more interrupt events have been generated" by accelerometer or gyroscope, respectively. At the same tim...

nebelgrau77 · 2022-01-12

Great, thanks!

nebelgrau77 · 2022-01-05

Great, thank you Eleon! I have an additional question regarding this sensor: there are two seemingly identical registers in the accelerometer/gyroscope part of the sensor, named STATUS_REG (17h and 27h). They seem to have identical fields, too. Are t...

User statistics

User Activity

LSM9DS1 - threshold setting - bit resolution and sign (8- vs 15- and 16-bit)

LSM9DS1 - how to set up interrupts for the magnetometer? Datasheet description of the INT_THS_L and INT_THS_H registers unclear.

Re: LSM9DS1 - how to set up interrupts for the magnetometer? Datasheet description of the INT_THS_L and INT_THS_H registers unclear.

Re: LSM9DS1 - how to set up interrupts for the magnetometer? Datasheet description of the INT_THS_L and INT_THS_H registers unclear.

Re: LSM9DS1 - how to set up interrupts for the magnetometer? Datasheet description of the INT_THS_L and INT_THS_H registers unclear.

Re: LSM9DS1 - how to set up interrupts for the magnetometer? Datasheet description of the INT_THS_L and INT_THS_H registers unclear.