About ERhod.1

ERhod.1 · 2021-08-16

I am getting this error after I modify my linker script (which I got from a project created with CubeIde):$arm-none-eabi-objcopy -O binary Prog_test_H735.elf Prog_test_H735.bin$arm-none-eabi-size Prog_test_H735.elf text data bss dec ...

ERhod.1 · 2021-08-05

Hi everyone, thank you for your help.Currently I can program the stm32h723 device at the nucleo board using the ST-Link V3 with the MCU voltage set to 3V3 but cannot with the voltage set to 1V8.I bought the STLINK-V3SET and the STLINK-V3 voltage con...

ERhod.1 · 2021-08-17

Thank you for helping me understand all these minor but interesting aspects of the linker script. If I do not need to initialize, the "NOLOAD" still creates the section that I need to create memory structures that will go in RAM_D1?Thank you for expl...

ERhod.1 · 2021-08-17

Thank you for explaining the issue. Now I understand the consequences of my code. And yes, I do not need to initialize it. I just need to make sure that that vector will be placed at D1 region, where it can be accessed by DMA1.

ERhod.1 · 2021-08-16

It worked. @TDK and @Community member were correct.I still do not understand. How does the MCU knows which data belongs to which region if ..."A BIN file is raw data. It has no way to indicate where different sections should go.".Thank you!

ERhod.1 · 2021-08-16

Thanks for your reply."Have you created a ridiculously large .BIN file due to the sparse placement of data?"Yes, its generating a 470MB .bin file."You can't place d1_dma_buffer in the middle of everything, this either needs to be a NOLOAD, or the dat...

ERhod.1 · 2021-08-06

I tried with OpenOCD as the debug probe at the CubeIDE and got all these messages:Open On-Chip Debugger 0.11.0-rc2+dev-00037-g4c4dbd9 (2021-02-09-13:39)Licensed under GNU GPL v2For bug reports, read http://openocd.org/doc/doxygen/bugs.htmlInfo : Li...

User statistics

User Activity

ERROR common.c: addr too high

Error when programing Nucleo Board(MB1364) with 1.8V

Re: ERROR common.c: addr too high

Re: ERROR common.c: addr too high

Re: ERROR common.c: addr too high

Re: ERROR common.c: addr too high

Re: Error when programing Nucleo Board(MB1364) with 1.8V