About CGAUC.1

CGAUC.1 · 2023-07-06

Hello, I'm using a STEVAL-PLC001V1 card. It is based on a STM32F746ZGT7 that is linked to a CLT01-38SQ7 for inputs and ISO8200AQ for outputs, using SPI.I try to read datas sent through SPI by the CLT01-38SQ7 and then send it back to the ISO8200AQ.My ...

CGAUC.1 · 2023-06-12

I am currently using a STEVAL-PLC001V1 board.I am trying to program it using CubeProgrammer. I am just trying to reprogram the demo mode at the moment. If I program it on the board without the option "Run after programming", the download is succesful...

CGAUC.1 · 2023-07-26

I checked again the doc and figured out I wasn't using the right pin for my input. The CS is configured on the PD6 pin. So I changed it, configured it as an output and it works just fine now, thanks for your help !

CGAUC.1 · 2023-07-17

I've got the following configuration for my pins : static void MX_GPIO_Init(void) { GPIO_InitTypeDef GPIO_InitStruct = {0}; /* USER CODE BEGIN MX_GPIO_Init_1 */ /* USER CODE END MX_GPIO_Init_1 */ /* GPIO Ports Clock Enable */ __HAL_RCC_GPIOC_C...

CGAUC.1 · 2023-07-12

I call HAL_SPI_Receive() multiple times, but the content of inputData does not change. The return values from my fonction seems to work on the first call, but nothing happens on the following calls.What do you mean by PB9 is not treated as an output ...

User statistics

User Activity

SPI value doesn't update in STM32F746

STEVAL-PLC001V1 "Core is locked up" or "The core is kept under reset"

Re: SPI value doesn't update in STM32F746

Re: SPI value doesn't update in STM32F746

Re: SPI value doesn't update in STM32F746