About TName.1

TName.1 · 2023-05-29

Hello,I have been stuck trying to connect my ST-Link V2 to my custom PCB. I am confident that each of the connections made on the schematic are correct and that the solder joints are ok. I have tested everything with a multimeter. I have tried updati...

TName.1 · 2023-06-01

Ok thank you for the help. At least I can narrow down the issue a little more and stop worrying about the schematic.

TName.1 · 2023-05-30

I updated the post with the schematic I am using if that is of any use. I also double checked that all of the pins are soldered correctly and there are no shorts or bridges.

TName.1 · 2023-05-30

updated post with schematic

TName.1 · 2023-05-29

I believe so. STM32CubeProgrammer reports 3.21-3.23 while the board is powered at 3.300

TName.1 · 2023-05-29

Everything is connected as shown here. I have tried connecting the board to both VAPP and to VDD. I have also tried with both SWO and NRST unconnected and connected. Also just confirmed that SWCLK is working and SWDIO is working with an LED and a slo...

User statistics

User Activity

Cannot connect the ST-Link V2 to my custom PCB "Error: No STM32 target found"

Re: Cannot connect the ST-Link V2 to my custom PCB "Error: No STM32 target found"

Re: Cannot connect the ST-Link V2 to my custom PCB "Error: No STM32 target found"

Re: Cannot connect the ST-Link V2 to my custom PCB "Error: No STM32 target found"

Re: Cannot connect the ST-Link V2 to my custom PCB "Error: No STM32 target found"

Re: Cannot connect the ST-Link V2 to my custom PCB "Error: No STM32 target found"