About MKaas.1

MKaas.1 · 2021-12-16

MKaas.1 · 2021-08-20

I have set :hostname_pn-base-files = "new_host_name"in my conf file.This seems changing /etc/hostname in base-files image. However, there is log message telling:"[ 7.249795] systemd[1]: Set hostname to <stm32mp1-disco>."Also, /etc/hosname contents ...

MKaas.1 · 2021-07-27

DISTRO : <no-custom-config-set>DISTRO_CODENAME : dunfellMACHINE : stm32mp1-discoI followed instructions from: https://wiki.st.com/stm32mpu/wiki/STM32MP1_Distribution_Package#Installing_the_Starter_PackageI initialized repo with:re...

MKaas.1 · 2021-12-20

Eleon,One more calibration story: https://ozzmaker.com/compass3/.Now this is ST sensor. In fact, pretty close to LSM9DS1. Unfortunately only magnetometer is calibrated this time.-Matti

MKaas.1 · 2021-12-20

Hi @Eleon BORLINI Thank you for your references, i'll have a look on them. Self test procedure seemed quite good as a start point. I just need to convert register writes to I2C or SPI transactions. I also found pretty nicely written tutorial for 9-D...

MKaas.1 · 2021-12-17

So, I have not found any application notes for calibration.

MKaas.1 · 2021-12-17

Ihave visited there and I have not found any application note there. In fact, IIO driver is for older kernel that I need to use (5.4.0). It does not matter as there seems to be IIO driver support for LSM9DS1-imu device int Linux 5.4.0. Everything see...

MKaas.1 · 2021-08-31

Yes, I can verify, that /etc/hostname did not change at boot when I booted first time Ethernet disconnected.Thank you for your help

User statistics

User Activity

Are there any application notes available for LSM9DS1 device? I would at least need information on running self test and calibration routines. These should preferally work with Linux IIO driver, but also raw I2C or SPI communication routines could be ok.

How tho change hostname from the default = MACHINE

I get ERROR: Nothing RPROVIDES 'mesa' (but /design/layers/meta-st/meta-st-stm32mp/recipes-st/images/st-image-vendorfs.bb RDEPENDS on or otherwise requires it) Error when I try to build core-image-minimal

Re: Are there any application notes available for LSM9DS1 device? I would at least need information on running self test and calibration routines. These should preferally work with Linux IIO driver, but also raw I2C or SPI communication routines could be ok.

Re: Are there any application notes available for LSM9DS1 device? I would at least need information on running self test and calibration routines. These should preferally work with Linux IIO driver, but also raw I2C or SPI communication routines could be ok.

Re: Are there any application notes available for LSM9DS1 device? I would at least need information on running self test and calibration routines. These should preferally work with Linux IIO driver, but also raw I2C or SPI communication routines could be ok.

Re: Are there any application notes available for LSM9DS1 device? I would at least need information on running self test and calibration routines. These should preferally work with Linux IIO driver, but also raw I2C or SPI communication routines could be ok.

Re: How tho change hostname from the default = MACHINE