About DGibe.1

DGibe.1 · 2021-05-06

Hi all,I'v developed a board with my microcontroller and one VL53L1X-SATEL - Breakout board that came with my X-NUCLEO-53L1A1 kit. I use a 3v battery for the board without regulator and 1K pull-up for the I2C line(100khz).I use the VL53L1X ULD API fi...

DGibe.1 · 2021-06-15

Hello John,With the help of Dominique, we found the solution. The problem was:As I use your VL53L1X breakout board, in your schematic the interrupt line has a pull-up R4=1K, and sometime the configuration sequence let the interrupt line state '1' or...

DGibe.1 · 2021-06-11

Dear John,Thank you for your suggestion, but I can't use this solution because I'm going to use not only 30s but also 1s , 8s and some time 48h for the intermeasurement. I don't have the interrupt line between the CPU and all VL53L1X (because of cabl...

User statistics

User Activity

VL53L1X problem with the SW standby consumption after the initialisation sequence.

Re: VL53L1X problem with the SW standby consumption after the initialisation sequence.

Re: VL53L1X problem with the SW standby consumption after the initialisation sequence.