About MTeun

MTeun · 2018-12-19

Well, the generated LWIP/ethernetif.c contains the following (after the header):Expression SWIPdatas is undefined on line 13, column 8 in ethernetif_h7.ftl. The problematic instruction: ---------- ==> list SWIPdatas as SWIP [on line 13, column 1 in e...

MTeun · 2021-08-16

Yes. Another way I can show you that writing 'seems' to work, but still causing to crash is to do the following:Define (static) r/o data to be put in the second bank using a mapping in the LD file and an attribute for the compilerCheck with ozone for...

MTeun · 2021-08-04

The user option bytes are not mapped to any memory address. It is literally not possible for you to write or read to them directly. They are not located "at the end of bank 1".They are not available in bank 2 (as specified) and the practical experien...

MTeun · 2021-08-04

Thanks for pointing that out, @TDK . However, I'm working with the @Glen te Hofsté on this, I think we need to add some more information.Our linker .LD file contains the following section:/* Memories definition */ MEMORY { DTCMRAM (xrw) : ...

MTeun · 2019-08-15

A HAL_TIMEOUT is caused most likely to some missing clocks. Check the call made to HAL_ETH_Init from the low_level_init function in ethernetif.c.This probably already returns a HAL_TIMEOUT during SWR.Also, you are reading the wrong register, you sho...

MTeun · 2019-06-04

Similar problem with older ioc file. Cannot migrate...2019-06-04 09:09:54,766 [INFO] MainDdrPanel:242 - [DDR PANEL] hideMenu2019-06-04 09:09:58,898 [INFO] ImportTextPane:162 - (OptionalMessage_ERROR) IP (ADC1) : Parameter (Rank) has Id (0#ChannelRegu...

User statistics

User Activity

Error (compile time) when generating LWIP from CubeMX 5.0?

Re: Flashing large binary (> 1Mb) to STM32H753VIT not working

Re: Flashing large binary (> 1Mb) to STM32H753VIT not working

Re: Flashing large binary (> 1Mb) to STM32H753VIT not working

Re: HAL_ETH_ReadPHYRegister always returns HAL_TIMEOUT

Re: STM32CubeMX 5.2.0 released