Posted on June 02, 2015 at 15:30Hi Tesca, Please try with the following line command and let me know by results : ''ST-LINK_CLI.exe'' -c swd -p ''c:\Users\gen0\workspace\Template\Release\Template.bin'' 0x08000000 -Rst -v Best Regards, Nouha

Posted on April 16, 2015 at 16:52Hi David, To do update the ST-LINK FW version go to ST-LINK>Firmware update. You have to un-plug the ST-LINK (in case you have already connected to your board) and plug it again so the ST-LINK becomes in DFU mode. ...

Posted on April 16, 2015 at 16:15Hi Pete_T, There is no relation between SN and the Unique ID. you can connect to one of them, using the ST-LINK_CLI like follow -c swd ID=3 -Rst ( in case you have 4 STM32 connected to your PC or more ). Best Regar...

Posted on April 16, 2015 at 15:53 Hi Patrick, No, all the files are only vailable throw the ST-LINK Utility Setup on the web site (besides the documents; User manual..) You'll find in attach the same, archive dates from 16/02 if you want. ...

Posted on April 15, 2015 at 13:30 Hi Patrick, Seems an installation problem from your side. To unblock the situation, please find here attached the M29W128 flash loader. Best Regards, Nouha ________________ Attachments ...