About BYOO

BYOO · 2018-10-29

STM32F091CBT6 BootLoader application problemIn the bootloader, there is no ploblem and jump to application code exactly. If I jump to application firmware in main() routine, timer interrupt works well, but if I jump to application firmware in sub-rou...

BYOO · 2018-10-31

I appreciate for your kindness !!!!!I have no much time to process the bootloader project, and so I’ll use “Jump_To_Application();�? in the main() routine only at first. After the end of the bootloader project, I’ll recheck you’re the advice.Thank yo...

BYOO · 2018-10-30

Thank you so much !!I am checking for the method of stack operation.

BYOO · 2018-10-29

Thank you very much for the quick your advice !!I already used remap, as below,/*** Definition ***//* Private variables ---------------------------------------------------------*/#define APPLICATION_ADDRESS (uint32_t)0x08004000//#if (defined ( __C...

User statistics

User Activity

STM32F091CBT6 BootLoader application problem. After jumping to main application from bootloaer, timer interrupt didn't work.

Re: STM32F091CBT6 BootLoader application problem. After jumping to main application from bootloaer, timer interrupt didn't work.

Re: STM32F091CBT6 BootLoader application problem. After jumping to main application from bootloaer, timer interrupt didn't work.

Re: STM32F091CBT6 BootLoader application problem. After jumping to main application from bootloaer, timer interrupt didn't work.