About TWirt.15

TWirt.15 · 2019-11-15

I couldn't get the CLI application running on the P-NUCLEO-WB55.USBDongle. I updated the FUS firmware according to ../STM32WB_Copro_Wireless_Binaries/Release_Notes.html and installed the stm32wb5x_Thread_FTD_fw.bin on CPU2. The FUS update exited with...

TWirt.15 · 2019-11-27

Hello Remi,I got some problems to get a Thread based project running with the CubeIDE from scratch (using the integrated CubeMX). I think this isn't fully supported yet. I decided to use one of the demo projects from the STM32CUbeWB support package. ...

TWirt.15 · 2019-11-20

I coverted the SW4STM32 project to a CubeIDE project using CubeIDE and compiled the project again. After downloading the resulting binary to 0x08000000, the dongle is detected as USB VCP and the CLI seems to work. As far as I can say, the binary deli...

TWirt.15 · 2019-11-19

After loading the HEX file to 0x08000000 I reset the switch from the Boot 0 to the IO position and tried to connect to the dongle on two different machines. Both of them are detecting the device as unknown USB device (error requesting device descript...

TWirt.15 · 2019-11-18

Hello Remi,I had to update the FUS because the reply on "STM32_Programmer_CLI.exe -c port=usb1 -r32 0x20030030 1" was 0x00050300. As mentioned, it is now 0x01000200.The security option bytes look fine. According to STM32CubeProgrammer the values are ...

TWirt.15 · 2019-11-18

Hello Stecklo, thank you for your reply. Unfortunately the setting RDP bits doesn't change the behaviour, also the topic you mentioned does not solve the problem.

User statistics

User Activity

USB dongle CLI firmware doesn't work

Re: USB dongle CLI firmware doesn't work

Re: USB dongle CLI firmware doesn't work

Re: USB dongle CLI firmware doesn't work

Re: USB dongle CLI firmware doesn't work

Re: USB dongle CLI firmware doesn't work