About CLaw.1

CLaw.1 · 2020-12-15

FS=11, BLE=0, LPen=0, HR=0 (10-bit normal mode, +/-16g FS). I expect the sensitivity to be 48mg/digit, and sure enough, if I right-align my 10-bit value and divide by 48 I get a value of about 1054 on the z-axis.When I set HR=1, no other changes, I e...

CLaw.1 · 2020-12-21

Hi EleonYes, the device is perfectly flat. The readings taken in +-2g normal mode are0x40, 0x01, 0xc0, 0x00, 0xc0, 0xbfBy my calculation this gives final values ofX = 20mg; Y = 12mg; Z = -1028mgwhich are pretty much where I might expect them to be. T...

CLaw.1 · 2020-12-21

Hi EleonThank you for your response. The actual readings I get from the device when set to FS +-16 HR mode are0x00, 0x04, 0x00, 0x04, 0x00, 0x50On the z-axis I have the 16-bit value of 0x5000, and using the function above, lis2dh12_from_fs16_hr_to_mg...

User statistics

User Activity

I am using the LIS2DH12 and get expected values in normal mode. When changing to high res mode the scaling is not as expected.

Re: I am using the LIS2DH12 and get expected values in normal mode. When changing to high res mode the scaling is not as expected.

Re: I am using the LIS2DH12 and get expected values in normal mode. When changing to high res mode the scaling is not as expected.