About LKamm.2

LKamm.2 · 2023-02-05

Dear all,I have a question regarding the read-out-protection on STM32 L1 series (STM32L151CB-A) and I was wondering, if the same problem occurred to anyone of you before.I am booting from internal flash memory (BOOT0 = GND) and set the option bytes R...

LKamm.2 · 2020-10-04

On my STM32L151CB-A (external PCB), the following issue is occurring when using the internal Real Time Clock:I configure Date, Time and Alarm A using the initialization routines generated by CubeMX. The Alarm A is set to trigger 7 seconds after the b...

LKamm.2 · 2020-10-04

Thanks for the quick help! Works perfectly fine! Had been working on a F1 device before and ported the code to the L1 without adjusting the RTC Readout.SOLVED

LKamm.2 · 2020-10-02

If anybody else is experiencing the same issue as mentioned in my previous post:For me it works not to use the STM32 Cube Programmer (GUI / CLI or integrated in Cube IDE).I have switched to openocd (Windows x64 binaries), either by opening a Debuggin...

LKamm.2 · 2020-10-02

If anybody else is experiencing the same issue as mentioned in my previous post:For me it works not to use the STM32 Cube Programmer (GUI / CLI or integrated in Cube IDE).I have switched to openocd (Windows x64 binaries), either by opening a Debuggin...

LKamm.2 · 2020-09-28

We are facing a similar problem on a L1-controller:We use the STM32L151CBT6-A on a custom PCB. The hardware is properly installed. All supply pins are connected with their respective signals. The programming connections are fine.The software STM32Cub...

LKamm.2 · 2020-09-28

We have got the same issue:We use the STM32L151CBT6-A on a custom PCB. The hardware is properly installed. All supply pins are connected with their respective signals. The programming connections are fine.The software STM32CubeProgrammer is capable o...

User statistics

User Activity

STM32L151CB-A not booting from internal FLASH with RDP = BB (Level 0)

RTC TR Time Register not incremented / updated on STM32L151CB-A, but ALARM interrupt is working

Re: RTC TR Time Register not incremented / updated on STM32L151CB-A, but ALARM interrupt is working

Re: STM32CubeProgrammer: Error: Flash loader cannot be loaded

Re: Error: failed to erase memory

Re: Error: failed to erase memory

Re: STM32CubeProgrammer: Error: Flash loader cannot be loaded