About sja

sja · 2020-06-22

Where can I find a list/table/docs on alternate functions for each pin ??(Not using STM32CubeMX)

sja · 2020-04-20

Is it possible to Load/Start the Cortex-M4 from TF-A or uboot ?For our use case we want RTOS in Cortex-M4 running as soon as possible.Well before linux finishes booting.

sja · 2020-04-19

We have a STM32MP1 system with no flash media.How do I push a TF-A/uboot image to DRAM and boot/run from DRAM withno MMC/flash media ?

sja · 2014-09-23

Posted on September 23, 2014 at 15:46I am using UDE 4.2.05 with the SPC560B-DIS (which has UDE debug hardware built in) I can load and run code via JTAG but ... How do I access the serial port connection to the target device ??? The target microcon...

sja · 2014-09-23

Posted on September 23, 2014 at 15:43What is the max SPC56 (SPC560B54L3) UART baud rate ? Thanks, Stuart

sja · 2020-04-19

Figured this out ... simple two line tsv file:#Opt Id Name Type IP Offset Binary- 0x01 fsbl1-boot Binary none 0x0 tf-a-stm32mp157c-ya157c-4e512d-trusted.stm32- 0x03 ssbl-boot Binary none 0x0 u-boot-stm32mp157c-ya15...

sja · 2012-06-18

Posted on June 18, 2012 at 19:01We are now seeing the exact same DFU enumeration inconsistency with ubuntu 10.04 host and the STM32F107 eval board. Was this problem ever solved ?

User statistics

User Activity

STM32MP1 Alternative Function List/Table

Load/Start Cortex-M4 from TF-A or uboot ?

How do I use STM32CubeProgrammer to boot from RAM with no media ?

SPC5-UDESTK Serial Console ?

SPC56 Max UART baud rate ?

Re: How do I use STM32CubeProgrammer to boot from RAM with no media ?

Re: STM32F105 USB DFU Bootloader enumerates inconsistently