User Activity

Posted on May 02, 2017 at 21:50Anyone have suggestions on how to free up additional SRAM? I reduced the Stack to 0x200 and Heap to 0x00 and gained almost 1K of RAM. I need like another 500-600 bytes. Thanks,MJ
Posted on March 28, 2017 at 17:17Is it possible to connect an external eeprom to the SPWF01SA.21 module? The stored eeprom data will be very small >1K and only serve to remember GPIO high or low settings of the modules STM32F103 core that an end use...
Posted on March 28, 2017 at 16:31Is it possible to connect an external eeprom to the SPWF01.21 module? The stored eeprom data will be very small >1K and only serve to remember GPIO high or low settings of the modules STM32F103 core that an end user ...
Posted on November 21, 2016 at 18:10Looking to see if someone can shed some additional light on programming the memory read protection level 1 or 2 for a STM32F030 device. There are a few examples but they perform other options that are not required...
Posted on February 26, 2016 at 15:19Is anyone aware of a method or even the feasibility to transfer captured data from the ADC module, transferred to SRAM, then stored to non volatile memory (flash) section of the Cortex M0 Arm core without having t...