About Samot No

Samot No · 2020-08-15

Hi,I'm working on a smartwatch and looking for a suitable accelerometer. I basically only need to do the following:Generate an interrupt when the watch is in viewing position (e.g. horizontal and tilted towards the user)Generate an interrupt for a si...

Samot No · 2019-06-26

Hello,I am building an IoT level sensor for a vessel. The vessel is emptied at the bottom, and I would like to sense how much stuff is still in there from the top lid. The tank is approximately 40cm deep, and 10x10cm wide and it is dark inside.Consid...

Samot No · 2020-08-20

Thank you for your input. I think I will try prototyping with both, although it might take a while to get results.Best regards!

Samot No · 2020-08-19

I'm afraid of the power consumption. As it will be used in a wearable (watch), I think the 6D interrupt is going to be triggered a lot, preventing the microcontrollor from sleeping. The LIS2DH12 would only wake up the microcontroller in the specific ...

Samot No · 2020-08-18

Hi,Thank you for your fast response. Yes, that's true, I need to read the registers anyway. I don't have another reason of choosing the LIS2DS12.However, I was thinking, if I use only the single tap OR double tap, I might use the tap functionality of...

Samot No · 2020-08-15

Hi,It took some time to try it out, and I forgot to answer you. But for the record, setting a smaller ROI works great!Best regards!

Samot No · 2019-06-27

Thanks for your fast responses. I do not have the option of painting the walls, I have to work with how it is. Due to the fact that the L1X is a long-distance chip, I just glanced over it, but the ROI settings might be just what I need, 15 degrees Fo...

User statistics

User Activity

Choosing the right accelerometer

Limit field of view for a narrow level sensor

Re: Choosing the right accelerometer

Re: Choosing the right accelerometer

Re: Choosing the right accelerometer

Re: Limit field of view for a narrow level sensor

Re: Limit field of view for a narrow level sensor