About flo flo

flo flo · 2018-05-18

Posted on May 18, 2018 at 14:17Hello Everyone,I am have a problem using Dfuse (v3.0.5) with my STM32L432KC.I have a USB CDC class, not using a composite CDC-DFU.Performing the DFU mode through the boot pin/bit.During upgrade I got the following erro...

flo flo · 2018-06-22

Posted on June 22, 2018 at 09:17I add a sleep time of 50ms 'sleep(50)' in case STATE_DFU_DOWNLOAD_BUSY in RunThread() function inside the downloadthread.cpp fileI have compiled the DFUSE v3.0.5 using the source giving by ST with visual Studio 2017.N...

flo flo · 2018-05-28

Posted on May 28, 2018 at 08:17 Turvey.Clive.002‌, did you get any trouble with DFU and clock? I have read that they're might be DFU limitations. I have a version information ID = 0x So no known limitations. but still wondering if they is ...

flo flo · 2018-05-22

Posted on May 22, 2018 at 10:32The previous answer was when the application was running.in DFU mode I dont have any clock signal on the PA8 pin.

flo flo · 2018-05-22

Posted on May 22, 2018 at 10:02on the MCO pin (PA8) I have a 80Mhz clock corresponding to my SysClk.

flo flo · 2018-05-18

Posted on May 18, 2018 at 14:37I am not using an externel clock.HSI48 for USBHSI:16 -> PLL to get 80MHz for the rest

User statistics

User Activity

DFU error: bad state machine in firmware

Re: DFU error: bad state machine in firmware

Re: DFU error: bad state machine in firmware

Re: DFU error: bad state machine in firmware

Re: DFU error: bad state machine in firmware

Re: DFU error: bad state machine in firmware