About Jeff Gros

Jeff Gros · 2017-12-05

Posted on December 05, 2017 at 23:07Hello ST Community,I have an application using the IIS2DH MEMS accelerometer. I was running into some issues, so to troubleshoot, I bought the STEVAL-MKI168V1 daughter board and SEVAL-MKI109V2 mother board. Using ...

Jeff Gros · 2024-11-29

I was running into the same problem. I had code from an L4 to timer trigger a sine wave via DMA into the DAC. But with the U5 it wouldn't work. The issue was the DMA transfer size. On the U5 the DMA destination transfer size must be word sized instea...

Jeff Gros · 2022-12-18

I came across the same problem as @MSatt.4 and I also needed to set the DBG_STANDBY bit on a STM32G484QE. This took be by surprise, as I've implemented standby on other processor families (F4xx and L4xx) without issue. I got a working example on an...

Jeff Gros · 2019-04-26

Just adding my name to the thread so I can track this.

Jeff Gros · 2019-04-24

I can confirm that with new blank projects, and version 5.2.0, which uses MxDb.Version=DB.5.0.20, the issue is fixed.However, 5.2.0 cannot seem to open my file (CubeMX spins forever on trying to load it). It was able to be opened with 5.1.0.See attac...

Jeff Gros · 2019-04-23

Turns out "5.0.10" isn't the correct version, as you cannot use RefInt, Temp or VBat!You need to use "MxDb.Version=DB.5.0.0".What a nightmare!

User statistics

User Activity

IIS2dh multi-byte read doesn't work?

Re: STM32U599 DAC doesn't work in DMA mode.

Re: STM32L476 wakeup flag not set when exit from shutdown after JLink removed

Re: STM32CubeMX LL_ADC_SetCommonPathInternalCh generation bug - only one internal ch is enabled

Re: STM32CubeMX5.1.0 ADC "DMA Continuous Requests" doesn't work

Re: STM32CubeMX5.1.0 ADC "DMA Continuous Requests" doesn't work