About wojciii

wojciii · 2022-09-06

The reason that I'm doing this is because I want to sign the mcuboot bootloader used by TF-M. (https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ext/target/stm/b_u585i_iot02a/include/flash_layout.h).The flash layout looks like...

wojciii · 2022-09-14

Forget about TFM_FLASH_BASE_ADDRESS. The important part is setting FLASH_LOAD_OFFSET in the Zephyr board definition. Increasing it will move the Zephyr unsecure partition up and hopefully resolve any clashes with the secure partition when merging th...

wojciii · 2022-09-13

I'm using Zephyr with the TF-M implementation there. Is this something you support?Doing what you suggest doesn't work - merging of the hex images fails as (because overlapping addresses) - therefore TFM_FLASH_BASE_ADDRESS needs to be changed.

wojciii · 2022-09-13

Also, I wonder what TFM_FLASH_BASE_ADDRESS should be set to in board.cmake. I would like to move the whole image by for example 64 KiB from the start of flash.if (CONFIG_HAS_FLASH_LOAD_OFFSET) MATH(EXPR TFM_HEX_BASE_ADDRESS_NS "${TFM_FLASH_BASE_AD...

wojciii · 2022-09-13

I would like to be able to update everything in this product and therefore I would like to sign the second stage bootloader. The immutable first stage bootloader also does some recovery in case the next stage gets corrupted.Have you tried looking at ...

User statistics

User Activity

I'm trying to modify the flash layout used for b_u585i_iot2a in TF-M. Please see the details below.

Re: I'm trying to modify the flash layout used for b_u585i_iot2a in TF-M. Please see the details below.

Re: I'm trying to modify the flash layout used for b_u585i_iot2a in TF-M. Please see the details below.

Re: I'm trying to modify the flash layout used for b_u585i_iot2a in TF-M. Please see the details below.

Re: I'm trying to modify the flash layout used for b_u585i_iot2a in TF-M. Please see the details below.