About David Peale

David Peale · 2017-08-11

Posted on August 11, 2017 at 20:05Hello,I am working with a Nucleo STM32F303RE board MB1136 rev C on a Windows-7 Dell Latitude E5450 PC. I have programmed USART2 using CubeMX, SW4STM32 IDE, and the HAL_USART_Transmit() function to simply send a nu...

David Peale · 2017-08-13

Posted on August 13, 2017 at 08:00 Hi Again, I have another clue as to what the problem may be. The Nucleo board mounts a portion of the ST-Link MCU flash as a removable storage disk drive. The periodic COM LED flashing that hangs the -303RE MCU ...

David Peale · 2017-08-12

Posted on August 13, 2017 at 05:39 Another thought: I recall now that the Nucleo board as delivered showed a similar problem of resetting after some idle time (e.g. ~ 15 minutes). If you take that stock nucleo -303RE board running the flashing LED ...

David Peale · 2017-08-11

Posted on August 12, 2017 at 04:49Thanks for those suggestions. I haven't had trouble with Status returning large values that produce large delays. Values seem to run from 0 to 4 (0 to 3 are enumerated in the typedef, 4 is not...)Further investigat...

User statistics

User Activity

Serial Port to PC Hangs on Nucleo STM32F303RE after COM LED flashes

Re: Serial Port to PC Hangs on Nucleo STM32F303RE after COM LED flashes

Re: Serial Port to PC Hangs on Nucleo STM32F303RE after COM LED flashes

Re: Serial Port to PC Hangs on Nucleo STM32F303RE after COM LED flashes