About DLlan.1

DLlan.1 · 2022-07-21

Hello,I have an STM32F407G-DISC1 evaluation board which I have been trying to connect to through SWD with a Segger JTrace Pro, but I haven't been able to connect to the board for some reason. I have been following a Segger provided document for the c...

DLlan.1 · 2022-07-22

I solved it with Segger support, it turns out the pinout on the JTrace Pro was reversed, so all I had to do was reverse my connections this entire time. It wasn't intuitive though since all the diagrams for the pinout have the pins arranged according...

DLlan.1 · 2022-07-22

I knew, it was at the bottom of the document I was following, but since it wasn't tested on the STM32F407 I didn't want to mess with the firmware. I solved it with Segger support eventually, turns out the pinout on the JTrace Pro 20 pin connector was...

DLlan.1 · 2022-07-22

I got it to work finally, turns out that the pinout on my JTrace Pro was reversed.

User statistics

User Activity

How to connect STM32F407G-DISC1 by SWD to JTrace Pro / JLink

Re: How to connect STM32F407G-DISC1 by SWD to JTrace Pro / JLink

Re: How to connect STM32F407G-DISC1 by SWD to JTrace Pro / JLink

Re: How to connect STM32F407G-DISC1 by SWD to JTrace Pro / JLink