About SEKLAMIN

SEKLAMIN · 2023-01-26

static const uint16_t TEMP_ADRESS = 0x48<<1; int main(void) { HAL_StatusTypeDef RETURN ; uint8_t buffer[1]; uint8_t buffer2[2]; uint16_t Val ; float temp_c ; HAL_Init(); SystemClock_Config(); MX_GPIO_Init(); MX_I2C1_Init(); buffer[0]=0x...

SEKLAMIN · 2022-09-22

SEKLAMIN · 2022-09-20

SEKLAMIN · 2022-09-22

(1) LoRaWAN with STM32 Getting Started: Part 1, LoRaWAN with STM32WL Overview - YouTube I follow this tutorial from STMicroelectronics about the hardware the gateway communicates with the TTN server but the end node device does not work I tried all ...

SEKLAMIN · 2022-09-20

thank you sir

SEKLAMIN · 2022-09-20

thank you for replying i'm working with nucleo_L073RZ connect another USART to ST-LINK MCU using flying wires between the ST morpho connector and CN3

User statistics

User Activity

hello i'm trying to make a project whit stm32f401ve and Digital Thermometer DS1621 using I2C protocol, and I have a problem whit i2c receive. here is my source code and photos of datasheet and simulation any help will be appreciated

I-CUBE-LRWAN v2.1.0 + Nucleo-L073RZ + I-Nucleo-LRWAN1 on TTN problem with the end node device

Nucleo board look at User Manual UM1724 Paragraph 6.8 any help with this line please ? [SB62 and SB63 must be ON, while SB13 and SB14 must be OFF]

Re: I-CUBE-LRWAN v2.1.0 + Nucleo-L073RZ + I-Nucleo-LRWAN1 on TTN problem with the end node device

Re: Nucleo board look at User Manual UM1724 Paragraph 6.8 any help with this line please ? [SB62 and SB63 must be ON, while SB13 and SB14 must be OFF]

Re: Nucleo board look at User Manual UM1724 Paragraph 6.8 any help with this line please ? [SB62 and SB63 must be ON, while SB13 and SB14 must be OFF]