About Michael Werson

Michael Werson · 2019-08-08

when its chip select input is high, as it is supposed to operating in an I2C mode. Will the HTS221 data bus change into an output state and override the common SPI data?

Michael Werson · 2017-02-13

Posted on February 14, 2017 at 00:23I am using the ST iso19653 and CR95HF software libraries in my application and by following the example set in the M24LRXX code I can make an inventory of a single tag. I want to be able to regonise more than 1 ta...

Michael Werson · 2019-11-13

Further to my previous questions I have now implemented an HT221 device in my project. I have developed software to read this device using i2c and can communicate with it. My question now relates to the values in the calibration registers, particular...

Michael Werson · 2019-08-11

Eelon,Thanks for the response, I guess my question is more to do with the fact that when this chip is sharing a common SPI bus then the SPI data will be clocked into the HTS221 when the chip select is low, however when the chips select is high it wil...

User statistics

User Activity

I am planning to use an HTS221 Temperature and humidity sensor in SPI mode. I wish to use it on a common SPI bus each device on the bus is enabled by bringing its chip select low.

making a multi tag inventory with CR95hf

Re: I am planning to use an HTS221 Temperature and humidity sensor in SPI mode. I wish to use it on a common SPI bus each device on the bus is enabled by bringing its chip select low.

Re: I am planning to use an HTS221 Temperature and humidity sensor in SPI mode. I wish to use it on a common SPI bus each device on the bus is enabled by bringing its chip select low.